Models > MGC6430BDW20

MGC6430BDW20 Maytag Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for MGC6430BDW20

Viewing 3 of 3
Burner Box, Gas Valves, And Switches Diagram and Parts List for Maytag Cooktop
Burner Box, Gas Valves, And Switches
Cooktop, Burner And Grate Parts Diagram and Parts List for Maytag Cooktop
Cooktop, Burner And Grate Parts
Optional Parts (not Included) Diagram and Parts List for Maytag Cooktop
Optional Parts (not Included)
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WP400021-1
$13.25
Sold individually.
In Stock
Burner Knob – Part Number: WP74011276
$29.64
This knob accepts a D-shaped shaft. Sold individually.
In Stock
Burner Head - 12K – Part Number: WPW10406797
$49.23
This part distributes flame evenly to your cookware.
In Stock
REGULATOR – Part Number: W11087445
$188.54
In Stock
Orifice Holder with Spark Igniter - Right Front – Part Number: WP7527P028-60
$69.16
In Stock
Foam Tape – Part Number: 12002793
$66.36
In Stock
Orifice Holder with Spark Igniter - 5K – Part Number: WP7527P023-60
$72.96
In Stock
LP conversion kit – Part Number: WP7509P103-60
$99.55
Special Order
CAP-BURNER – Part Number: W11189648
$59.38
Special Order
Holder, Surface Burner Orifice – Part Number: WP7527P026-60
$47.55
In Stock
MODULE-SPK – Part Number: WP7431P064-60
$225.64
In Stock
Double Burner Grate - Gray – Part Number: 74008043
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
RAM from SAN DIEGO, CA
Parts Used:
WP7527P028-60, WP400021-1
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
No ignition
First I drilled out the screws on the burner as they were fused. I opened the stove top cover to access the underside of the burner. Removed the orifice holder, by disconnecting the gas line with a line Wrench and the electric cord.

The trick is to be careful with the gas line. Also when you go to replace the orifice holder you will notice that the holes are not threaded. The metal is soft and you're supposed to just screw the screws into the holes and let them bite into the metal. Then you reattach the gas on the electric and put the stove top back together.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elizabeth from Rochester, NY
Parts Used:
WP74011276
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
the original knob was damaged from the broiler when I opened the oven door
had to put the old knob back on
0 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Charles from Buena Park, CA
Parts Used:
W11087445
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
Gas explosion due to bad Gas Pressure Regulator
First step is to turn gas off to cook top and also disconnect power to the unit. Than using a crescent wrench disconnect the gas line going to the unit from the Regulator. Than again using the crescent wrench disconnect the regulator from the bottom of the unit. Next remove the nipple that connects the gas line to the regulator from the o ld unit. Apply new pipe dope to the threads and screw it into the new one and tighten down. Next install the regulator to the unit and install the gas line to the regulator. once done with the install you can now plug the unit in and turn on the gas. You are now ready to use the cook top again
Read less
0 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More