CLZ8502ADB Magic Chef Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Frank from Pierce, ID
- Parts Used:
- Y8007P02060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The grommets came apart metal from rubber.
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joseph from wildomar, CA
- Parts Used:
- Y8007P02060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
range top loose, grommets missing
very easy to push each grommet into range top holes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Albert from Clewiston, FL
- Parts Used:
- 74003327
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
burner would not light
saw burner tube was completely rusted at end and would not line up with burner. decided to go ahead and replace all three tubes. was easy to install, able to get a good cleaning job on unit in the process. works fine, wife is happy and that is what matters in a motorhome.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randall from Rochester, NY
- Parts Used:
- WP74002414, 74002413
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
igniter would no longer work, it would stick
pull knob off streight out. remove two phillips head screws, disconnect wire to disassemble. To reassemble reattatch wire to replacement igniter, screw in two phillips head screws and push on the knob.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Hal from National City, CA
- Parts Used:
- Y8007P02060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
missing gromet
Pushed into hole by hand, really simple
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DONNA from WARREN, PA
- Parts Used:
- WP74002414
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old knob is broken
This item had to be returned. Didn"t fit. Our shaft is shorter, and the new knob would not stay on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from ARCHER, FL
- Parts Used:
- 74002413
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Wouldn't ignite
Pulled knob,removed 2 screws removed wire,removed old ignitor repl. With new reversed procedure,done
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- gail from bethany, MO
- Parts Used:
- 74001794
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
knob worn put
easy replaced after giving proper model and serial numbers. They were very helpful sending pictures so i could choose which knob might work as they had two for the same model number. The person answering my call was very helpful. Also return of the wrong ones I ordered was easy and refund prompt. I would highly recommend this company.Gail from Mo.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenneth from Lakewood, NM
- Parts Used:
- 74007287
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Finish errosion
Replaced with new part
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Niland, CA
- Parts Used:
- 74002413, WP5111A719-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Igniter failed
The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Martin from Millersburg, MI
- Parts Used:
- Y8007P02060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lost on of the Rubber Grommet holding the stove grate
So simple would be embarrassed to give any instructions; it is so self evident.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matthew from Vancouver, WA
- Parts Used:
- WP74002414
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The rotating ignitor knob on my RV stove broke
The old knob simply slides off the shaft. I aligned the fins on the back of the new knob with the grooves on the shaft of the ignitor and pressed the new knob on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john from mount vernon, WA
- Parts Used:
- 74003327
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
flashtube was burned off
put in new flashtube
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lisa from Plymouth, MA
- Parts Used:
- Y8007P02060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Rubber grommet for stove top cover
I ordered the grommet... Didn't match the others ... But it fit on , and will do the job
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Elizabeth, CO
- Parts Used:
- Y8007P02060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
range top was missing one of the rubber grommets used to hold the grate.
Just pushed the new grommet into the hole. The grommet fit just fine and took about 10 seconds to install.
Was this instruction helpful to you?
Thank you for voting!