Models > CLZ8560ADQ > Instructions

CLZ8560ADQ Magic Chef Cooktop - Instructions

Jump to:

All Instructions for the CLZ8560ADQ
1 - 12 of 12
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Frank from Pierce, ID
Parts Used:
Y8007P02060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The grommets came apart metal from rubber.
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.
23 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
joseph from wildomar, CA
Parts Used:
Y8007P02060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
range top loose, grommets missing
very easy to push each grommet into range top holes
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Albert from Clewiston, FL
Parts Used:
74003327
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
burner would not light
saw burner tube was completely rusted at end and would not line up with burner. decided to go ahead and replace all three tubes. was easy to install, able to get a good cleaning job on unit in the process. works fine, wife is happy and that is what matters in a motorhome.
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Hal from National City, CA
Parts Used:
Y8007P02060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
missing gromet
Pushed into hole by hand, really simple
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from ARCHER, FL
Parts Used:
74002413
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Wouldn't ignite
Pulled knob,removed 2 screws removed wire,removed old ignitor repl. With new reversed procedure,done
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Niland, CA
Parts Used:
74002413, WP5111A719-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Igniter failed
The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.
2 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Martin from Millersburg, MI
Parts Used:
Y8007P02060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Lost on of the Rubber Grommet holding the stove grate
So simple would be embarrassed to give any instructions; it is so self evident.
Was this instruction helpful to you?
Thank you for voting!
Customer:
john from mount vernon, WA
Parts Used:
74003327
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
flashtube was burned off
put in new flashtube
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lisa from Plymouth, MA
Parts Used:
Y8007P02060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Rubber grommet for stove top cover
I ordered the grommet... Didn't match the others ... But it fit on , and will do the job
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Elizabeth, CO
Parts Used:
Y8007P02060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
range top was missing one of the rubber grommets used to hold the grate.
Just pushed the new grommet into the hole. The grommet fit just fine and took about 10 seconds to install.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alvin from Hudson, FL
Parts Used:
7506P154-60, 74003327, 74003326
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Wore out parts replaced
Put new parts on & the only trouble I had , I had no ideal where the or how the Extension flash tubes went on had to take one of the burners off & looked it over & found out it had two little what I`ll call slices in it to put the tubes on after that it all went in place very easyly it all worked just fine
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Richwood, OH
Parts Used:
Y8007P02060
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
original grommets broken
The new grommets were NOT the correct parts, too big, so there was no repair.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CLZ8560ADQ
1 - 12 of 12