Models > KGCR025BWH0

KGCR025BWH0 KitchenAid Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for KGCR025BWH0

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
$20.79
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Order within the next 1 hr and 2 mins and your part ships today!
In Stock
Order within the next 1 hr and 2 mins and your part ships today!
This part goes around the back of the knob.
In Stock
Order within the next 1 hr and 2 mins and your part ships today!
$7.91
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Order within the next 1 hr and 2 mins and your part ships today!
Sold individually. This knob accepts a D-shaped shaft.
In Stock
Order within the next 1 hr and 2 mins and your part ships today!
Sold individually. This knob can accept a D-shaped shaft.
In Stock
Order within the next 1 hr and 2 mins and your part ships today!
This part helps your burner ignite and produce flame.
In Stock
Order within the next 1 hr and 2 mins and your part ships today!
Sold individually. This knob takes a D-shaped shaft.
In Stock
Order within the next 1 hr and 2 mins and your part ships today!
NOTE: No longer available in biscuit or white. Black only.
In Stock
Order within the next 1 hr and 2 mins and your part ships today!
Part is located on top of the igniter switch that's next to the gas valve. Helps regulate gas flow and the amount of normal leakage that may occur.
In Stock
Order within the next 1 hr and 2 mins and your part ships today!
There are 5 included in this kit.
No Longer Available
In Stock
Order within the next 1 hr and 2 mins and your part ships today!

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for KGCR025BWH0

Viewing 3 of 3
Will Not Start
Fixed by these parts
Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Billy from Martinsville, IN
Parts Used:
WP3185804
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
There was a crack in the porcelain not letting it spark
I used a screwdriver to pry the electrode assy. out of the burner. then disconnected the wire.
Then just connected the new electrode and place the assy, in the burner.
22 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joe from San Bruno, CA
Parts Used:
WP3185804
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
broken ignitor insulation; repeated sparking after burner lit
Disconnected gas & electric connections; lifted unit out of countertop onto padded table upside down. Unscrewed ~16 sheet metal screws for access. Removed bad ignitor by driving off retaining clip. Had to remove burner (3 screws) for access to install retaining clip on new ignitor. Reassembled, reinstalled. Works like new!
15 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Middletown, NJ
Parts Used:
WP3182568
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replaced Stove knob
Removed old one, installed new one
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!