Models
>
KICU509XBL00
KICU509XBL00 KitchenAid Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for KICU509XBL00
Viewing 2 of 2Manuals & Guides for KICU509XBL00
Click to downloadInstall
Installation Instructions
(1.80MB)
Install
Installation Instructions
(1.22MB)
Manual
Owner's Manuals
(2.70MB)
Specs
Product Specifications Sheet
(0.25MB)
Keep searches simple, eg. "belt" or "pump".
Special Order
In Stock
Special Order
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
February 10, 2022
I'm getting an f47 code, the right side does not function, the left side continues to work, the large heat plate was being used, we heard a pop the breaker also popped, what parts would recommend to correct this problem.
For model number KICU509XBL00
Hello Michael, thank you for your question. There may be a problem with the Cooktop Power Control Board, the User Interface (Touchpad), or the associated wiring. We hope this helps.
Was this helpful?
Thank you for voting!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Brad from HENDERSONVLLE, TN
- Parts Used:
- WPW10396824
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
We broke the edge of the Glass Cooktop
My cooktop just sits in the countertop cutout without the Kitchen Aid Side Brackets, no foam tape or any silicone caulk, so it was easy to lift it out and set on two small pieces of wood that spanned the cutout in the counter. The assembly is very lightweight. The bottom metal pan of the cooktop is approx. 2" deep, and is offset from the
... Read more
glass cooktop approx. 1.5" on all 4 sides. So the cooktop assembly simply sets on the wood pieces on the bottom pan. The glass cooktop has a metal skirt on all 4 sides that simply lifts off the pan after removing 6 torx screws. The back of the glass cooktop skirt does not have screws, just 2 tabs and slots for the tabs, so lift up the front and slide the glass cooktop off of the tabs. Now install the new cooktop glass and done! Easy. I did shut off breaker but did not unwire the cooktop.
Read less
Was this instruction helpful to you?
Thank you for voting!