Models
>
KGCT365XWH3
KGCT365XWH3 KitchenAid Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for KGCT365XWH3
Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Mar 28
In Stock
Order now and your part arrives by Mar 28
In Stock
Order now and your part arrives by Mar 28
In Stock
Order now and your part arrives by Mar 28
On Order
In Stock
Order now and your part arrives by Mar 28
$177.70
This spark module uses a high voltage spark discharge to the switch to ingnite the gas.
In Stock
Order now and your part arrives by Mar 28
$59.43
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
In Stock
Order now and your part arrives by Mar 28
Also known as spark electrode. This part helps your burner ignite and produce flame.
No Longer Available
Part is located on top of the igniter switch that's next to the gas valve. Helps regulate gas flow and the amount of normal leakage that may occur.
In Stock
Order now and your part arrives by Mar 28
This valve will automatically cut off the flow of gas when it reaches a certain pressure.
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from Waterford, MI
- Parts Used:
- WP4454392
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Wrench (Adjustable)
Sparker would not quit sparking after lighting the gas.
Turned off the gas then disconnected the gas line. Unplugged the AC cord and removed the unit from the counter top. Had to locate a suitable area to lay the cooktop, rather large. The bottom cover is held on by 6-8 sheet metal screws, however, the gas regulator and nipple must be removed also for the cover to come off. I removed the Ignit
... Read more
er module screws, leaving the wires connected and mounted the new module in it's place. I then removed one wire at a time from the old and put it on the new part. Replaced the back cover and reinstalled the gas regulator with fresh pipe sealant. Probably took an hour including cleaning the top and counter top.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tyrone from Stephens City, VA
- Parts Used:
- WP3181304
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Knob
Old knob was shattered, so there was no removal. Opened package and pushed the knob on. Turned to test.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- sheila from marietta, GA
- Parts Used:
- WP3181305
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
my knob cracked and broke
I simply pulled the cracked knob off the stovetop and replaced it with the new knob. Very easy!
Was this instruction helpful to you?
Thank you for voting!