Models > KGCT302XBL2 > Instructions

KGCT302XBL2 KitchenAid Cooktop - Instructions

Jump to:

All Instructions for the KGCT302XBL2
1 - 15 of 24
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
John from Waterford, MI
Parts Used:
WP4454392
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Wrench (Adjustable)
Sparker would not quit sparking after lighting the gas.
Turned off the gas then disconnected the gas line. Unplugged the AC cord and removed the unit from the counter top. Had to locate a suitable area to lay the cooktop, rather large. The bottom cover is held on by 6-8 sheet metal screws, however, the gas regulator and nipple must be removed also for the cover to come off. I removed the Igniter module screws, leaving the wires connected and mounted the new module in it's place. I then removed one wire at a time from the old and put it on the new part. Replaced the back cover and reinstalled the gas regulator with fresh pipe sealant. Probably took an hour including cleaning the top and counter top.
35 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tyrone from Stephens City, VA
Parts Used:
WP3181304
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Knob
Old knob was shattered, so there was no removal. Opened package and pushed the knob on. Turned to test.
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
sheila from marietta, GA
Parts Used:
WP3181305
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
my knob cracked and broke
I simply pulled the cracked knob off the stovetop and replaced it with the new knob. Very easy!
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Karen from Katonah, NY
Parts Used:
WP3181304
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Knob on The Stove Top
A friend visiting turned a knob on my black glass Kitch Aid Cooktop the wrong way. It goes from High to Low and counter clockwise rather than clockwise. Therefore it has happened many times over the 19 years I have had it. I have had to get replacements a couple of times and it has always been a hassle. This time when I was down to the last one I went online, found your website and without having to crawl under my stove to look for a model # I was able to just match it up with the #'s on the back side of the knob! I ordered a few and it was here within 2 days!Wonderful!Thank you!Karen From Katonah
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
scott from marietta, GA
Parts Used:
WP3181305
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Kitchenaid Stove top knob
pulled off the old metal clip with a pair of needle nose pliers and pushed the new knob on...voila! Turns out the rest of my knobs are almond and I bought white, but it's okay...knob was pricey but exactly the part I needed.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sandra from Lake Wylie, SC
Parts Used:
4175422
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Grate pads fell off- burner scratched surface-need special glue
Bought in auto repair store special black glue used for sealing gaskets. Husband needed to use latex gloves, toothpicks, ice pick, and small screw driver to glue and install new burner pads.
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from COLORADO SPGS, CO
Parts Used:
W10854242
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Plastic anchor tips broken.
Removed the broken items and replaced.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from LAKEWOOD, CO
Parts Used:
WP4454392
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
spark module failure, wouldn't spark.
The repair was fairly straightforward, much easier the second time around. The first part was defective. (irregular spark). I reordered and installed the new one. It works, but nowhere near as good as the original.The problem is that the frequency of the spark on these replacement modules is only once per second. To get technical, the gas as presented to the spark is turbulent, causing several sparks to occur before the ideal mixture coincides with the spark. Needless to say, there is an excess of gas wafting around the kitchen until it lights, sometimes in excess of 20 seconds. NOT SAFE! Our BBQ and fireplace insert spark orders of magnitude faster than this.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from RAINIER, WA
Parts Used:
WP3180081
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob skirt clips (2 of 4) broken
Gently pressed the lower two clips onto my thumbs as I pressed the skirt into the cooktop skirt hole. Be gentle or you can break the new skirt!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ray from POST, TX
Parts Used:
WP3180081
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Grommet broken
Good
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Sequim, WA
Parts Used:
WP3180081
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the little tabs that hold the skirt in the hole break off
I pulled the knobs off, lifted the broken skirts out and snapped the new ones in.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara from Emerald Isle, NC
Parts Used:
WP3181305
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The surface burner knob cracked on the metal shaft that connects it to the gas supply. We have had a hard time finding parts for our gas cooktop that is 16 years old and it was wonderful to find the part so easily and it was exactly what it was supposed to be. Our gas cooktop functions perfectly
popped off the old knob and place on the new. Simple.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Annette from GOLDEN, CO
Parts Used:
WP3181304
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Surface Burner Knob stem was cracked
Removed cracked know and replaced it with a new knob.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Norman from Tustin, CA
Parts Used:
WP3180081
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
backing for stovetop knobs
the decorative backings on our stovetop knobs had become frayed, and I simply pried off the old ones,and installed the new ones. I have use Parts Select for years for various parts replacement, their service is quick and accurate. When I need a part, I always check here first.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Albert from Casper, WY
Parts Used:
WP3181305
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old knob stems cracked/broken
Pulled off the old and pushed on the new!
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KGCT302XBL2
1 - 15 of 24