KGCC566HWH1 KitchenAid Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from Corinth, TX
- Parts Used:
- WP3191922
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the knob was melted by a hot pan
popped off the old knobs and put on the new ones in less than a minute
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- CAROL from ORANGE, CT
- Parts Used:
- WP3191923
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Stove is over 50 years old, all knobs were broken or worn
Went to a local appliance parts store and could find only black knobs--there were two kinds--one $3 each, the other $8 each. Both kinds looked AWFUL so I went on line and found partselect.com which had suitable knobs at a very reasonable price, ordered them and they were shipped the next day. Who could ask for anything more? The service was terrific.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Hurst, TX
- Parts Used:
- 3192157
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Knob on range top did not work.
Since removing the burner valve would disable the cooktop, I ordered the valve first. Unfortunately the valve could not be removed because the screw that hold it in place was frozen to the valve and manifold. I finally had to cut the screw off with a hacksaw. Since the screw is a special screw, substitutions did not work, so I had to order the screw and pay shipping a second time. These screws should be included with the valve. Anyway, the hacksaw did some slight damage to the manifold so that the screw did not seal off properly. I had to use a Dremel tool to smooth the surface and then use fiberglass to coat the surface to seal any scratches or potential leaks. I screwed the screw in after applying the fiberglass resin to the manifold surface while the resin was still pliable. This seemed to seal the manifold off so that there is no leak, but it does make me nervous. Because of having to reorder for the additional part, the range top took almost a week to repair and could not be used during that time all because the screw was not included with the burner valve. Also a screw with a larger head would have allowed a larger wrench to be used and the screw could have been removed easily. The screw head was so small that it rounded off from the wrench making it more difficult to remove.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from COLORADO SPGS, CO
- Parts Used:
- W10854242
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Plastic anchor tips broken.
Removed the broken items and replaced.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from RAINIER, WA
- Parts Used:
- WP3180081
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob skirt clips (2 of 4) broken
Gently pressed the lower two clips onto my thumbs as I pressed the skirt into the cooktop skirt hole. Be gentle or you can break the new skirt!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ray from POST, TX
- Parts Used:
- WP3180081
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Grommet broken
Good
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Traci from Bozeman, MT
- Parts Used:
- WP3191922
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Had melted knob on cooktop
Went great, part was perfect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Sequim, WA
- Parts Used:
- WP3180081
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the little tabs that hold the skirt in the hole break off
I pulled the knobs off, lifted the broken skirts out and snapped the new ones in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Norman from Tustin, CA
- Parts Used:
- WP3180081
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
backing for stovetop knobs
the decorative backings on our stovetop knobs had become frayed, and I simply pried off the old ones,and installed the new ones. I have use Parts Select for years for various parts replacement, their service is quick and accurate. When I need a part, I always check here first.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jodie from Carlsbad, CA
- Parts Used:
- WP3191922
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Burner knob appeared to have been accidentally melted by placing a hot pot on top of it.
I took the melted knob off, located the part # went online and found this site. I immediately found the correct burner knob, ordered it, and it came very quickly to my home! I just popped it right on the cooktop, and it's as good as new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marvin from Georgetown, TX
- Parts Used:
- WP3191922
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Burner knobs needed replacing due to hot pan melting them
Simiply pulled the old burner knob off and replaced them with the new knobs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JUDY from AIKEN, SC
- Parts Used:
- WP3191922
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
control knob was melted from a hot pan
Easy as 1 2 3. Removed ruined knob and set new knob on post. That's it. Complete success!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bonnie from Collegeville, PA
- Parts Used:
- WP3191923
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lost gas top knobs
just put them on and pressed down
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from Ladera Ranch, CA
- Parts Used:
- 3191293
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set, Wrench set
Worn out spring assembly in valve.
This was remove and replace of burner valve on a rangetop stove. Removed front pannel of stove. Removed lower panel support. Removed ignition/spark material/peice (slides right off). Unscrewed valve form underneath through access hole, and unscrewed gas connection on top. Removed and eplaced with new valve and reassembled everything in order. Fairly straight forward.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Leanne from Huntingtown, MD
- Parts Used:
- W10854242
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old skirts tabs broke off with age
Just replaced them.
Was this instruction helpful to you?
Thank you for voting!