KGCT305TAL2 KitchenAid Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from Waterford, MI
- Parts Used:
- WP4454392
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Wrench (Adjustable)
Sparker would not quit sparking after lighting the gas.
Turned off the gas then disconnected the gas line. Unplugged the AC cord and removed the unit from the counter top. Had to locate a suitable area to lay the cooktop, rather large. The bottom cover is held on by 6-8 sheet metal screws, however, the gas regulator and nipple must be removed also for the cover to come off. I removed the Igniter module screws, leaving the wires connected and mounted the new module in it's place. I then removed one wire at a time from the old and put it on the new part. Replaced the back cover and reinstalled the gas regulator with fresh pipe sealant. Probably took an hour including cleaning the top and counter top.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from Morris, CT
- Parts Used:
- 4173481
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken burner control knobs
the knobs where hard to find around my area. i went to several appliance repair stores and they were unable to locate the knobs. so, i went online, your site made finding them easy because i was able to restrict my search to exactly what i needed. they shipped quickly, we are very pleased.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marla from Roseland, NJ
- Parts Used:
- 4173479
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Control Knob stem broke
Removed broken control knob - and replaced with new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sandra from Lake Wylie, SC
- Parts Used:
- 4175422
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Grate pads fell off- burner scratched surface-need special glue
Bought in auto repair store special black glue used for sealing gaskets. Husband needed to use latex gloves, toothpicks, ice pick, and small screw driver to glue and install new burner pads.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bob from LAKEWOOD, CO
- Parts Used:
- WP4454392
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Wrench (Adjustable)
spark module failure, wouldn't spark.
The repair was fairly straightforward, much easier the second time around. The first part was defective. (irregular spark). I reordered and installed the new one. It works, but nowhere near as good as the original.The problem is that the frequency of the spark on these replacement modules is only once per second. To get technical, the gas as presented to the spark is turbulent, causing several sparks to occur before the ideal mixture coincides with the spark. Needless to say, there is an excess of gas wafting around the kitchen until it lights, sometimes in excess of 20 seconds. NOT SAFE! Our BBQ and fireplace insert spark orders of magnitude faster than this.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Curt from Teaneck, NJ
- Parts Used:
- 4173481
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
knobs were cracked
I removed the old knobs & replaced with new knobs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from Mamaroneck, NY
- Parts Used:
- 4173481
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
all but one of the four knobs were broken.
My folks were swtitching one knob around to controll all the burners. The repairman said the cooktop had been long retired and the only option was buying a new one. It's a great cooktop, though and it was a shame to ditch it for just because of knobs. Alas, right before we about to buy a new one, I discovered you guys. Halleluiah.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stacy from ROCKFORD, AL
- Parts Used:
- WP4173481
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Previous Burner Control Knobs were broken
Centered over the existing post and pushed down...very simple
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ernie from Gualala, CA
- Parts Used:
- 4173481
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
plastic knob had broken
Remobe broken knob and replace
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- KEITH from DOWNERS GROVE, IL
- Parts Used:
- 4173481
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old Knobs were broken
Replaced them easily by putting these new knobs on. Easy peasy lemon sqeazy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ana from penfield, NY
- Parts Used:
- 4173481
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
plastic on burner knob broken
just removed old knob,and installed new one.a no brainer!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ALLEN from Santa Fe, NM
- Parts Used:
- 4173481
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
knobs broke
pushed new knobs onto shafts
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Torkil from Newbury Park, CA
- Parts Used:
- 4173481
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knobs were cracked
They are slip-fit onto burner controls. Pulled them up, aligned new "D" shape in know with control, gently pushed them straight down. Careful, they apparently crack easily.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dorothy Stacy from Dallas, TX
- Parts Used:
- 4173479
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob stems had broken
Replaced with new knobs!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Oak Lawn, IL
- Parts Used:
- 4173481
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken knobs on an old range
Your company was the only one on the internet or locally that had these knobs. As soon as I read your reviews and Google approved, I made my mind up. Rather than by a new range for our first house as a family, you guys made it easy on us. Thank you!! Definitely going to refer your company!!!!
Was this instruction helpful to you?
Thank you for voting!