Models > 79044062402

79044062402 Kenmore Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 79044062402

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
This switch controls the stove top surface burner.
In Stock
This switch controls the stove top surface burner.
In Stock
$7.24
Sold Individually. Pan Head Screw - 8-18ab X 0.375
In Stock
In Stock
Special Order
$9.48
This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.
In Stock
In Stock
Special Order
No Longer Available
$12.00
In Stock
PAD
$2.16
Special Order

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for 79044062402

Viewing 1 of 1
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Homer from Gladstone, VA
Parts Used:
318044827
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
indicator light burned out
First you must disconnect power by throwing the circuit breaker off.You need to pull knobs from cook top. check underside to see if it is mounted to counter top, mine was not. Then raise the cook top and support bottom with 2x2's. Mine had three main screws in front, one on the sides and two in the back. The other thing you need to do is loosen the metal plates that have two screws on each plate. Three plates in front, two on each side and three in back. Once these are loosen, you can lift the stove top up to reveal the indicator lights. I found it was easier to support the top with a pan or something while working on it. Replace your indicator light and put everything back together.. It really wasn't to bad.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
KEVIN from CADET, MO
Parts Used:
318293824
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
burner wouldnt heat
took out 2 screws and disconnected wires .
16 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ryan from MORGANTON, NC
Parts Used:
318198817
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Element not working
Open range door remove 2 screws on bottom of stove top remove top
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!