Models > 79031013600

79031013600 Kenmore Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Manuals & Guides for 79031013600

Click to download
Keep searches simple, eg. "belt" or "pump".
This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the ...
In Stock
In Stock
This burner cap kit includes 5 black burner caps. The caps sit on top of the burner head. This part helps spread out the burner flame for even heating and protects the burner head from spills.
No Longer Available
In Stock
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
This burner head is used on gas stovetops. It is located underneath the burner cap.
In Stock
In Stock
In Stock
In Stock
No Longer Available
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 79031013600

Viewing 1 of 1
Will Not Start
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Julieta from ELMIRA, NY
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Screw drivers, Socket set
Gas stove won’t light on half the appliance
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow er and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!