Models > 79032453800

79032453800 Kenmore Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Manuals & Guides for 79032453800

Click to download
Keep searches simple, eg. "belt" or "pump".
This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the ...
In Stock
Order now and your part arrives by Mar 19
In Stock
Order now and your part arrives by Mar 19
Designed for residential gas ranges, this burner orifice regulates natural gas flow to a 9,500 BTU burner for consistent flame and efficient cooking. It fits various models from Frigidaire and Electro...
In Stock
Order now and your part arrives by Mar 19
$19.90
In Stock
Order now and your part arrives by Mar 19
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
Order now and your part arrives by Mar 19
12K
No Longer Available
This burner head is used on gas stovetops. It is located underneath the burner cap.
No Longer Available
In Stock
Order now and your part arrives by Mar 19
No Longer Available
In Stock
Order now and your part arrives by Mar 19
Special Order

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 79032453800

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Julieta from ELMIRA, NY
Parts Used:
808608804
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Gas stove won’t light on half the appliance
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow er and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!