Models > CVDX4180W

CVDX4180W Jenn-Air Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for CVDX4180W

Viewing 5 of 5
BLOWER PLENUM Diagram and Parts List for Jenn-Air Cooktop
BLOWER PLENUM
BODY Diagram and Parts List for Jenn-Air Cooktop
BODY
CONTROL PANEL Diagram and Parts List for Jenn-Air Cooktop
CONTROL PANEL
TOP ASSEMBLY Diagram and Parts List for Jenn-Air Cooktop
TOP ASSEMBLY
WIRING INFORMATION Diagram and Parts List for Jenn-Air Cooktop
WIRING INFORMATION
Keep searches simple, eg. "belt" or "pump".
Cooktop Downdraft Vent Grease Filter – Part Number: WPY706012
$49.39
This grease filter is sixteen and a half inches long and nine inches wide. It is made of metal and is intended for use with downdraft ranges and cooktops.
In Stock
Order now and your part arrives by Mar 19
Screw – Part Number: W11233072
$20.95
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Order now and your part arrives by Mar 19
Dryer Screw – Part Number: WP90767
$7.30
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
Order now and your part arrives by Mar 19
Range Glass Grease Collecting Jar – Part Number: WPY707869
$54.01
This jar is a little over five inches long. It is made of glass and is used for collecting the grease drippings of gas ranges.
In Stock
Order now and your part arrives by Mar 19
Range Screw – Part Number: WPY706189
$7.30
In Stock
Order now and your part arrives by Mar 19
Range Burner Cartridge Terminal Block – Part Number: WPY708730
$51.97
This is a burner cartridge terminal block for your range/cooktop. If you are having trouble with your elements heating up, this part may need to be replaced. It does not come with spades or wiring. Th...
In Stock
Order now and your part arrives by Mar 19
Stand Mixer Screw – Part Number: WP4159193
$8.35
This screw is sold individually.
In Stock
Order now and your part arrives by Mar 19
Range Motor Isolator – Part Number: WP71003558
$12.55
This motor isolator is less than an inch long.
In Stock
Order now and your part arrives by Mar 19
Drain Jar Lid – Part Number: WP5700M611-60
This grease jar lid is used for some of Maytag/Jenn-Air's brands of ranges and cooktops. This lid is not quite an inch high and is three inches in diameter.
No Longer Available
Range Exhaust Vent Blower Wheel – Part Number: WPY707985
$92.47
This exhaust vent blower wheel is almost seven inches in diameter, and just under four inches deep. It is made entirely of metal and is used with a range's venting system.
In Stock
Order now and your part arrives by Mar 19
Air Inlet Grill – Part Number: 71001673
This part is located over top of the blower in the center of the stove top.
No Longer Available
Rivet – Part Number: WP210720
$20.95
This rivet is an inch and a half long. It is used for many washing machines, microwaves, refrigerators, dryers, and ranges. Use of this rivet requires a rivet tool.
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for CVDX4180W

Viewing 3 of 3
Element will not heat
Fixed by these parts
Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing
How to fix it
Replacing the Range Exhaust Vent Blower Wheel

Replacing the Range Exhaust Vent Blower Wheel

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Robert from Ranchos de Taos, NM
Parts Used:
WPW10475147
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Burners kept clicking after ignited
This problem was driving me crazy for months. Of course, after I bought and installed the part and it still was not fixed I finally found a website that told me how to fix the clicking. The problem is that the removable head burners (#8 on the top assembly diagram) are not making good electrical contact with the base burners (#22). What I did was grab the head burners and grind them back and forth into the base burners with the weight on the heal of my hand. Steel wool or sandpaper would work too--you just want to clean the surfaces to restore electrical contact.
If you still want to know how to replace the spark module start by removing #24. This will allow the removal of #9 (after you take the knobs off). You may have to do some fiddling cause the rubber gasket is sticky. Next there are 2 obvious regular screws for #14 and 2 not so obvious star screws in the space where the burner valves are. After #14 is off there are 2 screws on the spark module to be removed and one that you can't loosen that is in a slot. You wriggle the module out of that one.
Read less
29 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Johnnie from Daphne, AL
Parts Used:
WPY706012
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace Grease Filter For Downdraft Stove Top
Lift off blower vent cover. Lift out old filter. Clean walls and bottom of down draft using degrease soap and warm water. Dry. Discovered my grease filter will not install diagonally as shown in unit manual. Decided to drop into downdraft and put in front of fan suction. Found this left a gap at the top of fan suction that was not co vered by the filter. Cut piece of wood 1 inch thick and width and length to drop down in the downdraft and lay on bottom. Set filter on top of wood in front of the fan suction. Verified that fan suction would pull filter tight against the opening by turning fan on and off. Put vent cover back over downdraft and told wife I was done.
Read less
27 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ronald from Avon, CO
Parts Used:
WPY708730
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Old Jenn--Air cook top inop. Model discontinued
Our Jenn-Air cook top is 25 years old. One can no longer order parts for this old of model. We ordered new SS burners as well as new Burner cartridge terminal blocks for a new and current model. They work perfectly. Took 10 minutes. $ 350 dollars verses $ 2600 for a new JennAir range plus instillation. Unit looks and works great. Pla n to order new switches next.
Read less
23 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More