Models
>
JED8430BDS18
JED8430BDS18 Jenn-Air Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JED8430BDS18
Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
$40.04
This is a genuine OEM replacement burner knob for your cooktop. The burner knob is used to turn your surface element on and off, and to adjust the temperature. If one of the knobs has broken, it shoul...
In Stock
This grease filter is sixteen and a half inches long and nine inches wide. It is made of metal and is intended for use with downdraft ranges and cooktops.
In Stock
In Stock
In Stock
In Stock
In Stock
$10.79
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
In Stock
In Stock
In Stock
In Stock
In Stock
$92.66
This exhaust vent blower wheel is almost seven inches in diameter, and just under four inches deep. It is made entirely of metal and is used with a range's venting system.
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for JED8430BDS18
Viewing 2 of 2Will Not Start
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Timothy from huntsville, AL
- Parts Used:
- 7920P202-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Cracked Galss Stovetop
1. Removed potand pans from under stovetop.
2. Disconnected exaust duct.
3. Raised the stove and placed wooden blocks under.
4. Unscrewed old top,and removed.
5. Placed new stovetop on stove, screwed into place.
6. Fresh caulk around opening.
7. Lowered stove into place.
8. Reconnedted duct work.
2. Disconnected exaust duct.
3. Raised the stove and placed wooden blocks under.
4. Unscrewed old top,and removed.
5. Placed new stovetop on stove, screwed into place.
6. Fresh caulk around opening.
7. Lowered stove into place.
8. Reconnedted duct work.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Johnnie from Daphne, AL
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace Grease Filter For Downdraft Stove Top
Lift off blower vent cover. Lift out old filter. Clean walls and bottom of down draft using degrease soap and warm water. Dry. Discovered my grease filter will not install diagonally as shown in unit manual. Decided to drop into downdraft and put in front of fan suction. Found this left a gap at the top of fan suction that was not co
... Read more
vered by the filter. Cut piece of wood 1 inch thick and width and length to drop down in the downdraft and lay on bottom. Set filter on top of wood in front of the fan suction. Verified that fan suction would pull filter tight against the opening by turning fan on and off. Put vent cover back over downdraft and told wife I was done.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary H. from Appleton, WI
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Filter was starting to come apart from frequent cleaning.
I removed the center vent and inserted the filter...easy as pie...I went to your website and everything was there in an easy to follow way that even I could understand, my husband was totally impressed that I took care of it on my own....silly man.....it was so easy and delivery was extremely quick....so simple....thank you for making it
... Read more
so!!!!
Read less
Was this instruction helpful to you?
Thank you for voting!