Models
>
AH150B
AH150B Jenn-Air Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for AH150B
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$13.95
This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.
In Stock
Order within the next 39 mins and your part ships today!
$219.98
This surface element is for ranges.
The surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before insta...
In Stock
Order within the next 39 mins and your part ships today!
This is a burner cartridge terminal block for your range/cooktop. If you are having trouble with your elements heating up, this part may need to be replaced. It does not come with spades or wiring. Th...
In Stock
Order within the next 39 mins and your part ships today!
$5.36
This is an authentic OEM replacement part. The screw is most often used in the assembly of ranges, cooktops, and wall ovens. A common use for this screw is to hold the burner head in place. However du...
In Stock
Order within the next 39 mins and your part ships today!
$14.09
This rivet is an inch and a half long. It is used for many washing machines, microwaves, refrigerators, dryers, and ranges. Use of this rivet requires a rivet tool.
On Order
Special Order
In Stock
Order within the next 39 mins and your part ships today!
$16.22
This part fits inside your range's terminal block to act as an insulator for the contact spade.
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for AH150B
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- paul from trumbull, CT
- Parts Used:
- W10823698
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
No heat on burner
Turned off electricity! Pulled stove out -lifted up glass top(carefully) simply removed burned out coil and replaced it with new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Johnny from Henderson, NC
- Parts Used:
- W10823702
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
6" burner on the radiant surface started smoking and burned out.
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit.
... Read more
Place new unit in between the three guides. Make sure the other unit is aligned also. Place glass top back unto unit and replace the 7 screws. Put unit back into stove top and test. Finished in less than 15 minutes with no issues.
Read less
Was this instruction helpful to you?
Thank you for voting!
The top would not heat,large or small eye.
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder.
Was this instruction helpful to you?
Thank you for voting!