ZGU48N4GH2SS General Electric Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- NORMAN from THOMSON, GA
- Parts Used:
- WB24X10091
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
old switch would not turn off
remove c clip, remove two wires
install new switch,
replace c clip, replace two wires
test
have a cup of coffee
install new switch,
replace c clip, replace two wires
test
have a cup of coffee
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darren from Redondo Beach, CA
- Parts Used:
- WB24X10091
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
inability of igniter to shut off
removed cover, removed clip and exchanged part
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- sherry from Raleigh, NC
- Parts Used:
- WB02X11090, WB02X11087
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
insert burner is broken
replace insert burner
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from Jacksonville, FL
- Parts Used:
- WB28X10065, WB13X10014
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers, Socket set
Broken gas line & missing cap
Front control panel must be removed but left hanging on wires, remove kick panel at base of stove, locate and remove all screws that attach side of stove (either side) when all screws have been removed from side panel you can lift up about an inch and remove side panel thus giving you access to base of burners and attached gas lines; after replacing gas line i recharged the lines with gas and checked for leakage by using a grill lighter, (no leaks?) i re-installed the side panel, this was the most difficult part of the repair because the side panel must be properly placed and lined up
Was this instruction helpful to you?
Thank you for voting!