Models > PP9830TJ1WW

PP9830TJ1WW General Electric Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PP9830TJ1WW

Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
The dual radiant element for your range or cooktop provides the heat that you cook with. It is found under the main cooktop. If your element will not heat, you will need to replace it with this part. ...
In Stock
In Stock
In Stock
$90.77
In Stock
No Longer Available
$56.66
This part is the replacement fan switch or downdraft vent fan knob for your range hood. It measures approximately 2 inches by 1 inch. The fan switch allows you to turn on the range hood fan when it is...
In Stock
No Longer Available
In Stock
Sold individually.
Special Order
No Longer Available
No Longer Available
No Longer Available

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for PP9830TJ1WW

Viewing 1 of 1
Element will not heat
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Andrea from ORLANDO, FL
Parts Used:
WB30T10133
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
9" Radiant Element did not heat up.
I started by Unscrewing the range top. 2 small screws. I took off the old piece by unclipping the piece . Then I color coded each wire so that I would know exactly where I would place the wires for the new part. 30 min maximum time spent changing the part. Please don't forget to unplug the range before you start.
41 of 52 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janice from ST CLR SHORES, MI
Parts Used:
WB30T10133
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Original heating Element was burned out
1st replacement part was damaged from Shipping.
Parts Select sent a new one that i received in only a few days.
our stove is slid into a granite island so the disassembly was not as simple as most. It was necessary to remove the controls, the controls housing & screws along the top of the oven door.
Within an hour the sto ve was back in place and working perfectly.
Great service from Parts Select
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cheryl from JOHNSONVILLE, SC
Parts Used:
WB30T10133
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Element bad
Since this was the third time I did it all I had to take two screws out to lift the top of stove and replace element.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!