Models
>
PP944ST2SS
PP944ST2SS General Electric Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for PP944ST2SS
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$110.00
This dual radiant element provides heat from beneath the cooktop and is 9 inches in diameter. It’s the larger burner and is ideal for bigger pots and pans. If your element isn’t heating, replacing it ...
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
$100.63
Designed for use with electric ranges, this surface element provides dependable heat to a specific burner area, helping you cook meals with precision and efficiency. Positioned under the cooktop surfa...
In Stock
Order now and your part arrives by Mar 26
Easily control your cooktop with this genuine General Electric replacement selector knob, designed for use with select GE cooktops. This high-quality part allows you to adjust burner settings and acce...
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
$110.95
This dual radiant surface element fits glass-top ranges and provides two heating zones for different pan sizes. It operates at 240 volts with dual wattage for efficient cooking. Replace it to fix issu...
In Stock
Order now and your part arrives by Mar 26
$37.03
This infinite switch and seal kit replaces a worn or faulty heat control switch on select electric ranges and cooktops. It regulates the power sent to a surface burner, allowing you to adjust the temp...
In Stock
Order now and your part arrives by Mar 26
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for PP944ST2SS
Viewing 2 of 2Element will not heat
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Andrea from ORLANDO, FL
- Parts Used:
- WB30T10133
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
9" Radiant Element did not heat up.
I started by Unscrewing the range top. 2 small screws. I took off the old piece by unclipping the piece . Then I color coded each wire so that I would know exactly where I would place the wires for the new part. 30 min maximum time spent changing the part. Please don't forget to unplug the range before you start.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Stevensville, MD
- Parts Used:
- WB30T10135
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Outer element not working
Turn off breaker to stove. Remove 2 screws in front under stove top molding. Raise stove top from front on hinges in back. I used a piece of wood to support top up while I worked on burner. Remove screws holding old burner in place. I found my problem on the old burner - the outer element had been shorted and fried. Carefully remove e
... Read more
ach wire and reinstall in new burner in proper location. Reinstall burner and stove top with old screws.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cheryl from JOHNSONVILLE, SC
- Parts Used:
- WB30T10133
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Element bad
Since this was the third time I did it all I had to take two screws out to lift the top of stove and replace element.
Was this instruction helpful to you?
Thank you for voting!