Models
>
PP7030DJ1BB
PP7030DJ1BB General Electric Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for PP7030DJ1BB
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$120.02
If your stovetop isn’t heating evenly or has stopped working altogether, this dual ceramic burner might be the fix you need. It’s about 10 inches wide and includes two heating elements—one for larger ...
In Stock
Order now and your part arrives by Jul 30
$76.42
This 6-inch radiant heating element fits beneath the glass surface of electric cooktops and ranges, supplying heat to the cooking zone. It operates at 1500 watts and 240 volts and measures slightly un...
In Stock
Order now and your part arrives by Jul 30
In Stock
Order now and your part arrives by Jul 30
$115.09
Designed for use with electric ranges, this surface element provides dependable heat to a specific burner area, helping you cook meals with precision and efficiency. Positioned under the cooktop surfa...
In Stock
Order now and your part arrives by Jul 30
$15.26
This part is the replacement spring for the radiant element in your range. It is black in color, curved in shape, and is approximately 1 inch by 1/2 an inch. The radiant element spring is found beneat...
In Stock
Order now and your part arrives by Jul 30
In Stock
Order now and your part arrives by Jul 30
In Stock
Order now and your part arrives by Jul 30
Special Order
Special Order
Special Order
Special Order
Special Order
Common Problems and Symptoms for PP7030DJ1BB
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Denise from SENECAVILLE, OH
- Parts Used:
- WB30X24111
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Replaced radiant burner element glass top range
First; turn off breaker to stove.
Second; remove two Phillips head screws that hold the top on, located in front, underneath, will have to open the oven door to see.
Third; prop the top up.
Four; disconnect wire clips of old element.
Five; plug in new wire clips of new element.
Six; unprop the top and realign ... Read more the top.
Seven; replace the two Phillips head screws to secure the top, then close oven door.
Eight; turn breaker back on.
Done and Back in Action! You Can Do This!
Second; remove two Phillips head screws that hold the top on, located in front, underneath, will have to open the oven door to see.
Third; prop the top up.
Four; disconnect wire clips of old element.
Five; plug in new wire clips of new element.
Six; unprop the top and realign ... Read more the top.
Seven; replace the two Phillips head screws to secure the top, then close oven door.
Eight; turn breaker back on.
Done and Back in Action! You Can Do This!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from HAGERSTOWN, MD
- Parts Used:
- WB30X24111
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Element out LF
Unplug stove.2 screws out ,lift top ,disconnect bad element, connect new element, put top down .2 screws in .plug stove back in...EASY PEASY
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from Marietta, GA
- Parts Used:
- WB30T10145
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Stovetop radiant burner went out
Turned off power at circuit breaker. Disconnected electrical connections from stove and lifted stove top out of counter. Removed glass top by removing about 8 screws from side of stove top.Replaced burner element and replaced glass top.
Was this instruction helpful to you?
Thank you for voting!