Models > JP356SM4SS > Instructions

JP356SM4SS General Electric Cooktop - Instructions

Jump to:

All Instructions for the JP356SM4SS
1 - 6 of 6
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Mary from Alexandria, VA
Parts Used:
WB03T10271
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Cooktop knob plastic attachment piece was broken
We'd purchased a new house and the previous owner had glued the knob in place when we noted it was broken--which 'repair' lasted about as long as the inspection did. Once we were able to locate the model #, it was easy to order the new knob (I got a couple as I have little faith that this will not happen again.)

Easy order, fast service, and easy re-installation: simply popping the new knob onto the metal rod protruding from the cooktop.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marco Antonio from CORP CHRISTI, TX
Parts Used:
WB30T10136
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Element broket
1.- going online to orden part 2 disconnect the power from the aplaince shoot Dow the power 3 tear down the appliance and disconnect the four terminals from the damage part reconnect the terminals to th new part reensamble the appliance and ready to go save $275 bucks in handy man labor
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frank from Marietta, GA
Parts Used:
WB30T10145
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Stovetop radiant burner went out
Turned off power at circuit breaker. Disconnected electrical connections from stove and lifted stove top out of counter. Removed glass top by removing about 8 screws from side of stove top.Replaced burner element and replaced glass top.
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Geertruida from LOMA LINDA, CA
Parts Used:
WB03T10272
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The selector knob inside is broken
The selector knob came as the original that fit execly easy.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
DONNA from EAST MEADOW, NY
Parts Used:
WB30T10136
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
8 Inch Burner Inop.
Remove range top [ten phillips screws] remove electrical connectors and lift out burner. Reverse procedure for installation.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JP356SM4SS
1 - 6 of 6