Models > JP656DD2BB

JP656DD2BB General Electric Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JP656DD2BB

Viewing 1 of 1
Control Panel & Cooktop Diagram and Parts List for General Electric Cooktop
Control Panel & Cooktop
Keep searches simple, eg. "belt" or "pump".
Haliant Element - 12 Inch – Part Number: WB30T10130
$162.57
This is a replacement haliant element for your cooktop or range. It is used with flat top ranges, and is found under the glass top of the range. This element is approximately 12 inches in diameter and...
In Stock
Order now and your part arrives by Mar 23
Radiant Element - 8 Inch – Part Number: WB30T10132
$59.11
Designed for electric ranges and cooktops, this 8-inch radiant element heats cookware evenly and efficiently. It’s a direct replacement for faulty or damaged burners. To install, lift the cooktop and ...
In Stock
Order now and your part arrives by Mar 23
Screw – Part Number: WH2X930
$14.65
This screw is sold individually.
In Stock
Order now and your part arrives by Mar 23
Element Radiant 5.5 IN – Part Number: WB30T10145
$100.63
Designed for use with electric ranges, this surface element provides dependable heat to a specific burner area, helping you cook meals with precision and efficiency. Positioned under the cooktop surfa...
In Stock
Order now and your part arrives by Mar 23
Knob – Part Number: WB03T10270
This is a replacement burner knob for your range. It is made of black plastic and is approximately 2 inches in diameter. The knob allows you to turn on and adjust the heat level of the range. If the k...
No Longer Available
Range Indicator Light – Part Number: WB25T10012
$38.06
In Stock
Order now and your part arrives by Mar 23
Tape – Part Number: WB06T10007
$50.42
This roll contains 108 inches of tape.
In Stock
Order now and your part arrives by Mar 23
Haliant Element – Part Number: WB30T10131
$112.95
Restore fast, even heating to your smooth-top range with this genuine radiant surface element. Measuring 8 inches in diameter, it uses advanced halogen technology to deliver quick, uniform heat for pr...
In Stock
Order now and your part arrives by Mar 23
Radiant Element Warmer – Part Number: WB30T10124
$75.95
Special Order
SPRING RADIANT (Complete) – Part Number: WB09T10005
$14.65
Special Order
BRACKET ELEM SUPPORT – Part Number: WB02T10602
$49.39
Special Order
GLASS MAINTOP Assembly – Part Number: WB62T10845
$368.57
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for JP656DD2BB

Viewing 2 of 2
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
matthew from waterford, NY
Parts Used:
WB30T10130
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
large portion of my duel heat burner went bad
easily lifted the top of the stove after removing two small screws in front of the stove.removed screws holding burner in place , disconnected some wires and replaced burner. be sure to turn off the power before beginning this project
19 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from SEYMOUR, IN
Parts Used:
WB30T10130
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
The stove top had a 12” double burner that only outside burner was working
Ordered the part, turned off the circuit breaker, test to see that power is off, take a 5/16” nut driver, and remove the 2 screws under the front of the stove top, then lift the top up and hold it up with an old 2x4 about 24” long. All the connections are plug and play, so I took some needle nose pliers, to pull all 5 wires off of the bur ner. Then all that’s left to do is remove 3 spring clips. That was easily done by inserting a flat screwdriver into the back of each clip and pry them out. It ended up being a very easy fix. There is Utube videos to show you how to do it.
Read less
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roberto L from LAUREL, MD
Parts Used:
WB30T10130
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Inside burner did not heat
Disconnect old burner and reconnect new one
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More