Models > ZGU366NP4SS

ZGU366NP4SS General Electric Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for ZGU366NP4SS

Viewing 3 of 3
CONTROL PANEL Diagram and Parts List for General Electric Cooktop
CONTROL PANEL
COOKTOP Diagram and Parts List for General Electric Cooktop
COOKTOP
GAS & BURNER PARTS Diagram and Parts List for General Electric Cooktop
GAS & BURNER PARTS
Keep searches simple, eg. "belt" or "pump".
Range Electrode Top – Part Number: WB13T10065
$40.71
This surface burner spark electrode is designed to ignite a gas burner by producing a reliable spark when the control is turned on. It helps restore proper burner operation when there is no spark, a w...
In Stock
Order now and your part arrives by May 24
Burner Cap (18k) – Part Number: WB29X43469
$47.14
This burner cap replaces a worn or discolored cap on high-output burners, helping ensure even heat distribution and reliable cooking performance. Designed for 18,000-BTU burners, it’s a direct drop-in...
In Stock
Order now and your part arrives by May 24
Screw – Part Number: WB01K10002
$34.27
Size: 8-32 inch Sold individually.
In Stock
Order now and your part arrives by May 24
SPRING IGNITER – Part Number: WB09T10011
$15.26
In Stock
Order now and your part arrives by May 24
Orifice Spud - LP - Right Front - Simmer – Part Number: WB28T10118
$20.72
Special Order
Igniter – Part Number: WB02T10323
$15.26
In Stock
Order now and your part arrives by May 24
Orifice Spud - LP - Right Front - Main – Part Number: WB28T10117
$20.72
In Stock
Order now and your part arrives by May 24
SCR 8-18 AB IHW 3/8 SN – Part Number: WB01K10042
$18.54
In Stock
Order now and your part arrives by May 24
BURNER HEAD – Part Number: WB16X26480
$73.24
In Stock
Order now and your part arrives by May 24
Screw – Part Number: WB01T10104
$15.26
In Stock
Order now and your part arrives by May 24
SCREW – Part Number: WB01K10091
$18.54
In Stock
Order now and your part arrives by May 24
Screw – Part Number: WB01T10092
$15.26
In Stock
Order now and your part arrives by May 24
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for ZGU366NP4SS

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Connie from WESTFIELD, IN
Parts Used:
WB13T10065
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Failed ignighter
Repair is easy. The keeper ring installation while holding the spring down was tricky. An extra set of hands is helpful in holding and replacing the keeper ring.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
O.Robert from Montrose, PA
Parts Used:
WB13T10065
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
The electrode had broke
I unscrewed the base where the electrode was attached to detached the electrode detached the wire to the electrode inserted new electrode with holding spring and clamp attached wire to electrode.
I then put the base back on top and screwed in the two screws assembled the remaining parts and turned on the stove unit and it worked I am very happy.
Read less
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More