Models > PP975BM2BB

PP975BM2BB General Electric Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PP975BM2BB

Viewing 1 of 1

Manuals & Guides for PP975BM2BB

Click to download
Keep searches simple, eg. "belt" or "pump".
This is a replacement haliant element for your cooktop or range. It is used with flat top ranges, and is found under the glass top of the range. This element is approximately 12 inches in diameter and...
In Stock
$12.22
This screw is sold individually.
In Stock
$7.76
Sold Individually.
In Stock
In Stock
In Stock
In Stock
In Stock
$50.81
This roll contains 108 inches of tape.
In Stock
This is a 28 oz bottle of Cooktop Cleaner.
In Stock
In Stock
In Stock
In Stock

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for PP975BM2BB

Viewing 1 of 1
Element will not heat
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
John from LEWES, DE
Parts Used:
WB30T10126
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
9in portion of heating element inoperable
first ,troubleshot switch--it was ok. next,troubleshot triple element & found that the 9in portion had an open in the heating element itself ordered .new element,installed it .Works like new!
20 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from WOODLAND, WA
Parts Used:
WB30T10126
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Center Burner of a triple element wasn't working
Been procrastinating putting in the new element but decided to do it yesterday even if it meant eating breakfast out. Twenty minutes after starting , breakfast was cooking, at home on the new element. Two screws out, switch wires, snap on retainers, replace two screws and you're done!
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from LAUREL, MD
Parts Used:
WB23T10023
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Lightning strike blew out my GE cooktop
Wife said cooktop was not working. I cut power and dropped the cover on the electronics box under the burners and could see it was burnt up. Looked like it would be hard to fix so I ordered a new cooktop. However, they couldn't place order until they measured - and that would not be for a week. So, I thought I would order the circuit board to see if I could replace it. Parts Select had good links to appliance parts so ordering was easy. Needed help to pull out the cooktop and flip it over but switching in the new board was relatively easy although there were lots of connectors to keep straight. Turned it on and it worked like new and cancelled order. Saved $1300 and was a hero.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!