Models
>
JGP329SET1SS
JGP329SET1SS General Electric Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JGP329SET1SS
Viewing 2 of 2
Manuals & Guides for JGP329SET1SS
Click to downloadKeep searches simple, eg. "belt" or "pump".
$12.49
Sourced directly from the manufacturer, this OEM replacement grate foot is for ranges and cooktops. The grate foot attaches to the bottom of the burner grate to prevent the cooktop from being scratche...
In Stock
$21.67
This genuine OEM knob for your stovetop burner is chrome in color and fits onto a D-shaped shaft. Replacing this part is simple and no tools are required, just pull off the broken knob and push the ne...
In Stock
This genuine OEM part is a top burner spark electrode, also known as a range surface burner igniter. This part is used to create a spark that lights the flame for the surface burner on your gas range....
No Longer Available
The burner cap is used on your gas range to cover the burner heads. This genuine OEM replacement part is black in color and measures approximately 3 inches in diameter. The purpose of the burner cap i...
In Stock
$20.98
If you need new burner caps for your gas range, these are genuine OEM replacement parts. This part is used as a cover for the burner head and helps to distribute the flame. It is black in color and me...
In Stock
This is a burner cap for your gas range. The cap is black in color and about 3 inches in diameter. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is th...
In Stock
In Stock
$39.01
This part is the replacement surface burner head for your gas range. It is silver in color and is approximately 3.5 inches in diameter. This burner is sold individually. The burner head distributes ga...
In Stock
In Stock
In Stock
In Stock
This part is the spark igniter switch and harness assembly for your gas range. This harness assembly has 4 igniter switches already wired into it. It includes the igniter switches and the complete wir...
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for JGP329SET1SS
Viewing 4 of 4Will Not Start
Fixed by these parts
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
How to fix it
Touchpad does not respond
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Russell from Reedley, CA
- Parts Used:
- WB18T10339, WB13K10014
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Constant Clicking from the igniters
I first removed the top of the cooktop, which was 12 screws with a special star shape to them. Then had to pull the igniters out with some pliers (they have a really tight fit). Then remove the harness. Then I replaced the harness. After assembling, I replaced one of the ceramic igniters due to it being covered in baked on grease. Wo
... Read more
rked perfectly after that. I thank PartSelect for having super fast delivery. I ordered my parts on a Monday, they were at my doorstep the very next day, I was like WOW. And I chose regular shipping. Thank you very much for your service and your salespeople were VERY helpful, even after 3 order changes.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathryn from Star City, AR
- Parts Used:
- WB02T10461
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Grate Foot had worn out
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ken from Stony Brook, NY
- Parts Used:
- WB18T10339
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
No click or ignition after turning on burner - had to replace Ignitor Switch assembly
Do not remove the gas line.
Take off the burner racks and burner covers
Gently extract/remove the ignitors from each burner. You may have to use pliers, but be careful. They are ceramic.
Once you pull out the ignitors, you can remove the ignitors from their wires using plyers, you may have to twist them a ... Read more little.
To take off the top - use Star screw drivers to remove the burners
Remove all the burners.
The star screws, and the burners are the only thing holding the top on.
Take off the steel top.
That exposes the ignitor switch assembly.
Make sure you follow the positioning diagram that comes with the new part.
Thats it really.
I removed the gas, because I thought I had to, but you don't need to. You can do the whole job in 30 minutes if you are careful.
Hope it helps.
You'll have to
Take off the burner racks and burner covers
Gently extract/remove the ignitors from each burner. You may have to use pliers, but be careful. They are ceramic.
Once you pull out the ignitors, you can remove the ignitors from their wires using plyers, you may have to twist them a ... Read more little.
To take off the top - use Star screw drivers to remove the burners
Remove all the burners.
The star screws, and the burners are the only thing holding the top on.
Take off the steel top.
That exposes the ignitor switch assembly.
Make sure you follow the positioning diagram that comes with the new part.
Thats it really.
I removed the gas, because I thought I had to, but you don't need to. You can do the whole job in 30 minutes if you are careful.
Hope it helps.
You'll have to
Read less
Was this instruction helpful to you?
Thank you for voting!