Models
>
JP623BR1BC
JP623BR1BC General Electric Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JP623BR1BC
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
Sold individually. This seal prevents any leaks from getting under the cooktop or into the switch area.
No Longer Available
On Order
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Brent from HUNTER, OK
- Parts Used:
- WB23K5043
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
switch was weak.
Open top by reaching through a burner hole after the power has been disconnected at the fuse box. Take 4 1/4 screws out. take 2 phillips screws out of old switch. Take wires off one at a time placing them on the new switch. as an added precaution take a picture with your phone. Replace screws and lower top to working position. Replace kno
... Read more
bs on stems and turn back on the power.
Read less
Was this instruction helpful to you?
Thank you for voting!