Models
>
ZGU375LSD1SS
ZGU375LSD1SS General Electric Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for ZGU375LSD1SS
Viewing 5 of 5Keep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
$123.65
Also known as spark electrode. This part helps your burner ignite and produce flame.
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
$209.82
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
Order within the next 12 hrs and your part ships today!
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- NORMAN from THOMSON, GA
- Parts Used:
- WB24X10091
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
old switch would not turn off
remove c clip, remove two wires
install new switch,
replace c clip, replace two wires
test
have a cup of coffee
install new switch,
replace c clip, replace two wires
test
have a cup of coffee
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janie from SPARKS, NV
- Parts Used:
- WB25X10009
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
The indicator light for a burner had burned out.
First we removed the knob used to turn on the burner. Then we unscrewed the surrounding black burner label. We could see where the bulb went but had some difficulty getting into the very small space. I dropped the bulb a few times trying to place it and it landed about six inches below the cooktop. To retrieve the bulb, I removed the r
... Read more
ubber washer on the metal rod on which the knob sat. With a flashlight, I located the bulb and used a pickle plucker (kitchen tool) to get the bulb. This happened several times. The bulb was finally secured in the white bulb recepticle and then pushed up into the its hole in the cooktop. Then we replaced the black burner label and the knob. Success.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mark from LAKEWAY, TX
- Parts Used:
- WB49X10076
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
broken cook top grate
Ordered a GE replacement grate TWICE. Both times the grate arrived broken. I paid twice for the grate over a four month period because Part Select takes so long to ship after payment. Now, I get nothing be repeated BS emails from PartSelect about how to file my claim. They just can not seem to get around to authorizing a part return o
... Read more
r refund.
PartSelect is BS! Go elsewhere
PartSelect is BS! Go elsewhere
Read less
Was this instruction helpful to you?
Thank you for voting!