Models
>
JGP326BEF1BB
JGP326BEF1BB General Electric Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JGP326BEF1BB
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
$52.75
This part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and start the burner.
In Stock
Order now and your part arrives by Sep 26
$72.95
This spark module delivers reliable ignition signals to ensure consistent startup. Proper ignition enhances safety and performance. Replacing a faulty module restores dependable ignition.
In Stock
Order now and your part arrives by Sep 26
$53.95
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
In Stock
Order now and your part arrives by Sep 26
This orifice spud changes the burner from natural gas, to liquid propane. This orifice is sold individually.
No Longer Available
Sold individually. This seal prevents any leaks from getting under the cooktop or into the switch area.
No Longer Available
Special Order
Common Problems and Symptoms for JGP326BEF1BB
Viewing 2 of 2Will Not Start
Fixed by these parts
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jorge from Tulsa, OK
- Parts Used:
- WB24T10071
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
electronic ignitors would not stop firing even when burner was off
first I removed all the srews from the burners that hold the glass cooktop. I then disconected the two wires from the damaged gas valves and replaced them all four with the new ones. After that I put it all togehter and work just fine and celebrated with a good cold beer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- VINCENT from CYPRESS, TX
- Parts Used:
- WB13X46909
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Spark module was not working correctly
I unscrewed the burners which was three screws per burner then removed gas control knobs and pulled up range top and un hooked the old module and replaced it with the new one two screws hold it in place and connected it the same way the old one was and put range back together and now it works perfect and saved me over $250.00 and part onl
... Read more
y coated around $40 with shipping great parts seller and I highly recommend partselect.com very easy fix thanks
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eve and from MIDLAND, MI
- Parts Used:
- WB24T10071
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
One burner would not ignite.
I replaced the igniter under the knob.
Was this instruction helpful to you?
Thank you for voting!