Models
>
JP340BA1BB
JP340BA1BB General Electric Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JP340BA1BB
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 32 mins and your part ships today!
In Stock
Order within the next 32 mins and your part ships today!
In Stock
Order within the next 32 mins and your part ships today!
In Stock
Order within the next 32 mins and your part ships today!
In Stock
Order within the next 32 mins and your part ships today!
In Stock
Order within the next 32 mins and your part ships today!
In Stock
Order within the next 32 mins and your part ships today!
In Stock
Order within the next 32 mins and your part ships today!
In Stock
Order within the next 32 mins and your part ships today!
In Stock
Order within the next 32 mins and your part ships today!
In Stock
Order within the next 32 mins and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for JP340BA1BB
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Leslie from Meridian, MS
- Parts Used:
- WB30X38926
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Flat surface stovetop element was burned out
1. Removed brackets holding the cooktop in place.
2. Removed the cooktop.
3. Removed the screws holding the housing for the elements.
4. Removed bad element.
5 Connected new element.
6. Reassemble
2. Removed the cooktop.
3. Removed the screws holding the housing for the elements.
4. Removed bad element.
5 Connected new element.
6. Reassemble
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Mattawa, WA
- Parts Used:
- WB23M9
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Intermitently the switch would stick on high.
Pulled unit from the counter top, removed all side screws holding the top on and set the top off. Removed switch mount section, Identified the terminal wire locations. I then removed the old switch and connected the wires per my diagram. Returned all screws, tested the burner for opeation and reset the cooktop back into the counter hol
... Read more
e and secured.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carole from Grand Haven, MI
- Parts Used:
- WB03T10025
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
broken knob on gas range
pulled off old knobs and replaced with new knobs.
Only one was broken, but wanted all of them to match so ordered enough for entire range. Worked perfectly. Looks great!
Only one was broken, but wanted all of them to match so ordered enough for entire range. Worked perfectly. Looks great!
Was this instruction helpful to you?
Thank you for voting!