Models > JGP331EP2WG

JGP331EP2WG General Electric Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JGP331EP2WG

Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
Sold Individually.
In Stock
$7.76
Sold Individually.
In Stock
This gasket goes under the burner bowl to help protect the glass from high heat. Sold individually.
No Longer Available
Sold individually.
No Longer Available
This part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and start the burner.
In Stock
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane. This valve automatically cuts off the flow of gas at a certain pressure.
In Stock
This part is sold individually. It is white on the top side, and black underneath. Used for gas ranges. You may need to order the drip bowl seal.
No Longer Available
This part is sold individually. It is white on the top side, and black underneath.
No Longer Available
This trim ring is white on the top side and black underneath.
Special Order
No Longer Available
This igniter is used to light the top surface burner on a range/stove. It is sold individually.
No Longer Available
Special Order

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for JGP331EP2WG

Viewing 3 of 3
Will Not Start
Fixed by these parts
Fixing
How to fix it
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Steve from Broken Arrow, OK
Parts Used:
WB32M10
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Drip pans needed to be replaced.
Simiple repair. Determined drip pan size (sm, med., lg.) removed 2 screws holding drip pan, placed gasket around new drip pan and installed. Repaired took less than 5 minutes.
18 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jorge from Tulsa, OK
Parts Used:
WB24T10071
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
electronic ignitors would not stop firing even when burner was off
first I removed all the srews from the burners that hold the glass cooktop. I then disconected the two wires from the damaged gas valves and replaced them all four with the new ones. After that I put it all togehter and work just fine and celebrated with a good cold beer.
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nelda from Carmichael, CA
Parts Used:
WB31M11, WB31M10
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Socket set
Large and small Burner Drip Bowls needed to be replaced
The drip bowls of my stove had to be replaced. The tough job about this is that the bowls need to be ordered which we did. The order was sent to my house within a couple days. The drip bowls were replaced and they look and work just fine. The gas stove is about 10 yrs old and it needs the parts special ordered now. I used to wash and use a bit of elbow grease but this time it required too much effort. So an easy replacement did the trick.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!