Models
>
FEC30C4ABE
FEC30C4ABE Frigidaire Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for FEC30C4ABE
Viewing 4 of 4Manuals & Guides for FEC30C4ABE
Click to downloadInstall
Installation Instructions
(0.28MB)
Install
Installation Instructions
(5.05MB)
Manual
Owner's Manuals
(0.68MB)
Manual
Owner's Manuals
(1.49MB)
Wiring
Wiring Diagram
(0.08MB)
Keep searches simple, eg. "belt" or "pump".
$12.59
This OEM drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. Drip bowls catch any spills, and are a quick, easy, and cheap way to improve your cooktop aesthetic....
In Stock
Order within the next 10 hrs and your part ships today!
$7.46
This drip bowl is an OEM approved replacement part designed for use with various electric ranges and cooktops. This part is located underneath the burner to contain any spills while cooking. It fits ...
In Stock
Order within the next 10 hrs and your part ships today!
On Order
Special Order
In Stock
Order within the next 10 hrs and your part ships today!
Special Order
Special Order
In Stock
Order within the next 10 hrs and your part ships today!
Special Order
Special Order
Special Order
In Stock
Order within the next 10 hrs and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for FEC30C4ABE
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Fred from Redmond, OR
- Parts Used:
- 318293814
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Burner would stay on high heat only. Repairman wanted $278.00 to fix...I bought the switch for under $30.00 delivered and spent 10 minutes fixing it myself.
Turned power off to the stove at breaker box. Pulled the 4 plastic knobs off of the stove. Unscrewed the 4 round parts that are directly under each knob to gain access to the switches. Took the two small phillips screws out holding the bad switch. Installed the wires from the bad switch to the new switch and then reinstalled everything in
... Read more
reverse order. I saved over $200.00 by doing this repair myself with only two screwdrivers.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Henry from Georgetown, SC
- Parts Used:
- 318293814
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Burner not cycling Went to Hight heat even at low settings
Disconnected power,(Breaker OFF}
Followed directions as directed by instructions. Removed mounting screws for burner control Switch panel. Disconnected wire leads to switch. Replaced Switch and reassembled. All directions were well established. Your Quick delivery of the Switch was next day delivery. Down time approximately ... Read more 30 minutes in time for wife to fix dinner. Thanks for your help!
Followed directions as directed by instructions. Removed mounting screws for burner control Switch panel. Disconnected wire leads to switch. Replaced Switch and reassembled. All directions were well established. Your Quick delivery of the Switch was next day delivery. Down time approximately ... Read more 30 minutes in time for wife to fix dinner. Thanks for your help!
Read less
Was this instruction helpful to you?
Thank you for voting!
Needed new drip bowls.
Pulled out heating elements. Removed old drip bowls. Inserted new drip bowls and re-installed heating elements.
I was extremely pleased with the very quick delivery of needed parts.
I was extremely pleased with the very quick delivery of needed parts.
Was this instruction helpful to you?
Thank you for voting!