Models
>
PLGC36S9CCA
PLGC36S9CCA Frigidaire Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for PLGC36S9CCA
Viewing 4 of 4
Manuals & Guides for PLGC36S9CCA
Click to downloadInstall
Installation Instructions
(0.61MB)
Manual
Owner's Manuals
(1.12MB)
Manual
Owner's Manuals
(5.21MB)
Wiring
Wiring Diagram
(1.61MB)
Keep searches simple, eg. "belt" or "pump".
In Stock
This burner cap kit includes 5 black burner caps. The caps sit on top of the burner head. This part helps spread out the burner flame for even heating and protects the burner head from spills.
No Longer Available
In Stock
In Stock
$67.31
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
In Stock
$46.45
Also known as spark electrode. This part helps your burner ignite and produce flame.
In Stock
In Stock
In Stock
$55.82
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
Special Order
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for PLGC36S9CCA
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Duff from Buena Vista, CO
- Parts Used:
- 316032002
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
gas ignitor continued to run after turned on or off
Removed all of the grates, control knobs and gas diffusers. Unscrew the drip pans, two on each pan, which attach the pans to the gas supply. Raised the drip pans from the top and unplugged the ignitors from all pans. Remove the top and the rubber deflector over the ignitor switch. The ignitor switch snaps off and on. One of the seals unde
... Read more
r the drip pan was broken and needed replaced. I would recommend ordering these also. Turned out this was a good time to give everything a goo cleaning then replace as removed.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Julieta from ELMIRA, NY
- Parts Used:
- 808608804
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Socket set
Gas stove won’t light on half the appliance
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow
... Read more
er and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.
Read less
Was this instruction helpful to you?
Thank you for voting!