Models > FGC36S9JBA

FGC36S9JBA Frigidaire Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FGC36S9JBA

Viewing 4 of 4

Manuals & Guides for FGC36S9JBA

Click to download
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Mar 19
Sold Individually.
In Stock
Order now and your part arrives by Mar 19
Kit of 4.
No Longer Available
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
Order now and your part arrives by Mar 19
In Stock
Order now and your part arrives by Mar 19
Also known as spark electrode. This part helps your burner ignite and produce flame.
In Stock
Order now and your part arrives by Mar 19
In Stock
Order now and your part arrives by Mar 19
Sold individually.
No Longer Available
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
No Longer Available
This has a small center hole.
No Longer Available
In Stock
Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FGC36S9JBA

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Duff from Buena Vista, CO
Parts Used:
316032002
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
gas ignitor continued to run after turned on or off
Removed all of the grates, control knobs and gas diffusers. Unscrew the drip pans, two on each pan, which attach the pans to the gas supply. Raised the drip pans from the top and unplugged the ignitors from all pans. Remove the top and the rubber deflector over the ignitor switch. The ignitor switch snaps off and on. One of the seals unde r the drip pan was broken and needed replaced. I would recommend ordering these also. Turned out this was a good time to give everything a goo cleaning then replace as removed.
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Julieta from ELMIRA, NY
Parts Used:
808608804
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Gas stove won’t light on half the appliance
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow er and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!