Models > FGC6X5XEDD

FGC6X5XEDD Frigidaire Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FGC6X5XEDD

Viewing 4 of 4
BURNER Diagram and Parts List for Frigidaire Cooktop
BURNER
COOKTOP Diagram and Parts List for Frigidaire Cooktop
COOKTOP
COVER Diagram and Parts List for Frigidaire Cooktop
COVER
WIRING DIAGRAM Diagram and Parts List for Frigidaire Cooktop
WIRING DIAGRAM

Manuals & Guides for FGC6X5XEDD

Click to download
Install
Installation Instructions
(1.46MB)
Wiring
Wiring Diagram
(0.57MB)
Keep searches simple, eg. "belt" or "pump".
Surface Burner Igniter Electrode – Part Number: 316011200
$32.04
Use this igniter with sealed burners.
In Stock
Order within the next 5 hrs and your part ships today!
Spark Module – Part Number: 316135702
$94.31
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
Order within the next 5 hrs and your part ships today!
Igniter Switch – Part Number: 316032002
$55.82
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
Special Order
Orfice – Part Number: 5303210090
$43.48
Special Order
Bushing – Part Number: 318146301
No Longer Available
Burner Cap – Part Number: 316098505
$50.68
Special Order
Gas Pressure Regulator – Part Number: 5308007974
$250.69
***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.
In Stock
Order within the next 5 hrs and your part ships today!
Screw – Part Number: 316011100
No Longer Available
Burner Trim Ring - Large – Part Number: 316011304
$95.74
Special Order
KNOB SET OF 4 – Part Number: 5304492931
No Longer Available
SCREW – Part Number: 5303323138
$12.60
Special Order
SCREW – Part Number: 5303211311
$12.02
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FGC6X5XEDD

Viewing 3 of 3
Will Not Start
Fixed by these parts
Fixing Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Rusty from Howell, NJ
Parts Used:
316011200
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Igniter porcelain was cracked and burner would not light.
un-pluged stove,removed the one screw holding the broken igniter. disconected the one wire. installed new igniter and slipped on wire. The igniter came with a new bracket, the old one rusted away which is why the old igniter broke.
53 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
chris from Venice, CA
Parts Used:
316011200
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Bad igniter.
The stove was older so the burner was hard to get out. The small screw heads broke off, so I had to carefully center punch and drill out the screw bodies. The igniter screw was also frozen in the pot metal burner. That screw requied drilling and tapping with the installation of a new 6-32 screw. Once the burner was refurbished, the igni ter mounted easily. Afte attaching the gas line and igniter wire, the burner worked great.
Read less
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Terry from Wilkinson, IN
Parts Used:
316011200
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
burner would not lite
no need to remover burner. Lift top up use a 1x4x5" to hold top up. Use short #2 screw driver remove screw and replace with new igniter
12 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More