Models
>
FEC30S6ABE
FEC30S6ABE Frigidaire Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for FEC30S6ABE
Viewing 5 of 5Manuals & Guides for FEC30S6ABE
Click to downloadInstall
Installation Instructions
(0.39MB)
Install
Installation Instructions
(1.69MB)
Manual
Owner's Manuals
(0.68MB)
Manual
Owner's Manuals
(1.49MB)
Wiring
Wiring Diagram
(0.19MB)
Keep searches simple, eg. "belt" or "pump".
On Order
This switch controls the large surface burner. As per manufacture the original screws will damage new switch. New screws are needed.
In Stock
Order within the next 0 mins and your part ships today!
In Stock
Order within the next 0 mins and your part ships today!
In Stock
Order within the next 0 mins and your part ships today!
In Stock
Order within the next 0 mins and your part ships today!
In Stock
Order within the next 0 mins and your part ships today!
Special Order
$9.48
This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.
In Stock
Order within the next 0 mins and your part ships today!
Special Order
Special Order
In Stock
Order within the next 0 mins and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for FEC30S6ABE
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Leon from Deer Paerk, TX
- Parts Used:
- 318293825
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
switch was not turning off had to jiggle it to go off
no problem slightly different shape than original but labels for wires matched up mounting screws aligned perfectly works great
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Oconomowoc, WI
- Parts Used:
- 318293825
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Large Burner was not heating up properly
Don't be put off when you first get the new switch. It's not an exact duplicate to the one your replacing. You will notice that the new switch has 5 electrical connectors and you'll see 6 wires on the old one. start by removing the L1 wire(s) off the old switch, you will see that it actually has 2 wires connected to the same connector.
... Read more
Now connect to the L1 position on the new switch. Continuie with taking one wire at a time off the old switch and connect to the corresponding connector on the new switch (all the connectors are coded the same, ex. L1, P, etc....) Once complete the switch and burner worked perfectly
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- larry from chatsworth, GA
- Parts Used:
- 318293825
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
burner got to hot
repair it
Was this instruction helpful to you?
Thank you for voting!