Models > EW30GC60IS1 > Instructions

EW30GC60IS1 Electrolux Cooktop - Instructions

Jump to:

All Instructions for the EW30GC60IS1
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Julieta from ELMIRA, NY
Parts Used:
808608804
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Gas stove won’t light on half the appliance
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the power and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kirsten from MINNETONKA, MN
Parts Used:
318569900
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Something broke on the underside of one of the knobs that turn the center gas burner of and on.
I removed the defective knob (which was easy to do, because it was not seated....just sitting on the metal head, but disconnected). I lined up the new knob and pushed down gently.

I turned the knob and the burner lit the way it was supposed to!
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the EW30GC60IS1
1 - 2 of 2