Models > AKS3040WW

AKS3040WW (P1142525NWW) Amana Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for AKS3040WW

Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
This is a genuine OEM replacement part. This spark ignition electrode is what lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, it sits nex...
In Stock
This is a genuine OEM replacement part. This double burner bowl is designed for used with cooktops and ranges. The burner bowl is found underneath the burner grate. This part is designed to fit around...
No Longer Available
This top burner knob is two and a half inches in diameter. It is all white in color and is made of plastic. This knob has light gray lettering denoting the off, low, medium, high, and light positions....
In Stock
This OEM replacement part has been sourced from the manufacturer. This spark ignition module is designed for use with ranges and cooktops. The spark ignition module works to provide the spark require...
No Longer Available
This is an OEM part sourced directly from the manufacturer. The burner head the is main part of the burner assembly in your gas range and cooktop. The gas flows through the burner head and is lit by t...
No Longer Available
$5.37
This is an authentic OEM replacement part. The screw is most often used in the assembly of ranges, cooktops, and wall ovens. A common use for this screw is to hold the burner head in place. However du...
In Stock
This is an authentic OEM replacement part. This top burner, also known as a surface burner, with electrode is designed for use with gas ranges and cooktops. This 9k burner head is medium in size. The...
In Stock
This is a genuine OEM replacement part. This bolt is commonly used in the assembly of ranges, cooktops, and washers. This part is most often used as an electrode mounting crew, however we recommend yo...
No Longer Available
This part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.
No Longer Available
Part might differ in appearance, but functions same as original. Sold individually.
No Longer Available
No Longer Available
Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.
No Longer Available

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for AKS3040WW

Viewing 3 of 3
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
HUY from ALISO VIEJO, CA
Parts Used:
WPY0316773
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Broken Electrode, no spark
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner
51 of 61 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Alexandria, VA
Parts Used:
32020101
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 4 burners wouldn't light
Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one by one, put the stove top in place, connected the wires to the burner discs. Done, and it works! It took longer to find and order the part than it did to change it out.
25 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Friendswood, TX
Parts Used:
WPY0316773
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burner would not ignite when control in "light" position
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the elec trode wire to the electrode. drop the burner assembly back into position on the cooktop. Attach the burner assembly using two screws.
22 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!