Models
>
AKS3080SS
AKS3080SS (PAKS3080SS1) Amana Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for AKS3080SS
Viewing 4 of 4
.gif "SUPPLEMENTAL INFORMATION Diagram and Parts List for PAKS3080SS1 Amana Cooktop")
Keep searches simple, eg. "belt" or "pump".
$47.20
This is a genuine OEM replacement part. This spark ignition electrode is what lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, it sits nex...
In Stock
In Stock
$5.36
This is an authentic OEM replacement part. The screw is most often used in the assembly of ranges, cooktops, and wall ovens. A common use for this screw is to hold the burner head in place. However du...
In Stock
$42.09
This is a genuine OEM Amana replacement part. This burner cap is designed for use with ranges and cooktops, it is part of the burner assembly. There are two reasons the burner cap is essential to the ...
Special Order
This part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.
No Longer Available
Part might differ in appearance, but functions same as original. Sold individually.
No Longer Available
Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.
No Longer Available
This is an OEM part sourced directly from the manufacturer. The burner head the is main part of the burner assembly in your gas range and cooktop. The gas flows through the burner head and is lit by t...
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for AKS3080SS
Viewing 3 of 3Will Not Start
Fixed by these parts
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- HUY from ALISO VIEJO, CA
- Parts Used:
- WPY0316773
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Broken Electrode, no spark
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Friendswood, TX
- Parts Used:
- WPY0316773
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Burner would not ignite when control in "light" position
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the elec
... Read more
trode wire to the electrode. drop the burner assembly back into position on the cooktop. Attach the burner assembly using two screws.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from Fishkill, NY
- Parts Used:
- Y0316705
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Switch Spark would not stop sparking.
I was able to remove the top cover by unscrewing 10 srews. Once the cover was off I removed the plastic shield above the damaged switch. Then unplugged the 2 wires off the switch. Pulled the faulty switch out. Replaced it with the new switch and plugged in the 2 wires. Reinserted the plastic cover put the top cover on and put the screws
... Read more
in place. Tested the new switch and worked fine.
Read less
Was this instruction helpful to you?
Thank you for voting!