Models > AKR3000WW > Instructions

AKR3000WW (P1143710NWW) Amana Cooktop - Instructions

Jump to:

All Instructions for the AKR3000WW
1 - 9 of 9
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Marilyn from Peachtree City, GA
Parts Used:
W10291024, W10291024
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
I needed drip bowls that fit properly
I ordered gray enamel drip bowls and they fit perfectly. Unfortunately 2 of them were chipped and bent slightly. They still worked which was better than the make shift ill fitting ones that came with the house so I decided to keep them. I did tell parts select about it and they sent me a new order of drip pans at no charge. I used the perfect ones but the 8" drip pans flaked off paint after one use. I guess this is an Amana defect...the paint doesn't stick under heat.
92 of 96 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan A from Millsboro, DE
Parts Used:
W10291024
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Chipped and discolored pans
This purchase was for replacement parts, not for repair. Installation was a simple matter of taking out the old and installing the new, which is extremely easy to do. One item was damaged; Parts Select was absolutely fantastic to deal with regarding replacement! One word of caution regarding the product - I mistakenly ordered Whirlpool drip pans which have an opening in the bottom, the Maytag pans don't. Initially I thought that it was a mistake by Parts Select; which wasn't the case. The pans fit perfectly so I kept them. If I reorder, I will be certain that I order the correct pans.
17 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janice from Kerrville, TX
Parts Used:
W10291024
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed new drip pans
New ones fit perfectly, and looks beautiful!
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
judy from palatine, IL
Parts Used:
WPW10259868
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
i sat a tupperware bowl on a hot burner and it stuck to the burner so i had to replace it
just plugged it in!
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
marie from WATERBURY, CT
Parts Used:
W10291024
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
my first order a small drip bowl
came only I had to order the set again
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Suzanne from COZAD, NE
Parts Used:
WPW10259868
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The three braces under the coils had weakened and fallen apart
I simply pulled out the old coils and plugged in the new ones. I saved the little pieces that accompanied each coil, because I didn't know what they were used for.
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janice M from Ocala, FL
Parts Used:
WPW10259868
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of the small burners just fell apart
I just installed the new burners into the proper place and they fit This was very easy to order. Just had to find the model number which the web site told me where to find this. I am very satisfied with the service Thank You
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patty from East Patchogue, NY
Parts Used:
W10291024
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
drip pans were old and corroded
ulplugged elements and dropped in new pans
Was this instruction helpful to you?
Thank you for voting!
Customer:
Flavio from Tampa, FL
Parts Used:
W10291024
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
The original parts were in poor shape
Just remove the original parts, unplugged the resistance coils, install the new parts and reconnect the coils.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the AKR3000WW
1 - 9 of 9