Models > 1171WH-30K

1171WH-30K Admiral Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 1171WH-30K

Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Roman from West Caldwell, NJ
  • Parts Used:
    WP7403P190-60
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Igniter Switch on the burner was constantly on
To get to the switch I had to remove the knobs and the front panel of the burner valves. There were some dozen screws, top and bottom holding the panel in-place.
The switch slid off the burner valve stem easily but removing the wires I had to pull with the pliers. There seamed not to be a wire release that I could see.
Replacing the wires was no problem. They slid into place by just pushing them in. Assembly was the reverse.
8 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Anna from New York, NY
  • Parts Used:
    12500061
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Old range knobs were broken.
Old range knobs were broken. I just pulled them off and pushed on the new knobs.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Kathy from PACHECO, CA
  • Parts Used:
    12500061
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Worn wobbly knobs from 1984, the wording, ie: off-hi-sim-warm, had worn off.
Pulled off old knobs, replaced with new knobs. Took less than 30 seconds. Easy as 1-2-3. I'm happy.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!