Models
>
5715K17
5715K17 Rolair Compressor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 5715K17
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
$4.99
This is an authentic OEM replacement part sourced directly from Rolair. The rubber feet on the bottom of your compressor not only keep the machine stable, they help keep the machine in one place durin...
In Stock
$14.33
This is an authentic Rolair replacement part. Air filters and are used to stop things such as sawdust, wood chips, job site debris, dirt, and dust debris from clogging up and contaminating the carbur...
In Stock
$104.62
This is an authentic OEM replacement part sourced directly from Rolair. The pressure switch is the device on your compressor that reacts to the pressure changes in your compressor tank, and it tells t...
In Stock
$16.81
This is a genuine Rolair replacement part. During regular operation of you compressor condensation builds up in the compressors tank, this drain valve allows you to open the tank up, release the pres...
In Stock
$46.71
This is a genuine OEM replacement part sourced directly from Rolair. When the filter on your compressor is not working properly you will experience pressure drops and reduced efficiency. This filter a...
On Order
In Stock
In Stock
$20.46
This is a genuine OEM replacement part sourced directly from Rolair. This part serves two main functions, it is a plug to ensure oil is not escaping the crankcase as the crankshaft rotates and the pis...
In Stock
In Stock
In Stock
$4.99
This is an authentic OEM replacement part sourced directly from Rolair. The rubber feet on the bottom of your compressor ensure it stays in one place during operation, and they help limit vibration du...
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
October 25, 2021
My pump fill the tanks up but will not rotate unless the tanks are down to 15psi. Why is that and what can be done?
For model number 5715K17
Hello Jerry, Thank you for the question. This could be an indication the Pressure Switch is defective and may need to be replaced. To complete this repair you would need: wrench set, nut driver set and a thread-sealing tape.
• Shut off the electricity and drain the air tank
• Remove the tank pressure gauge
• Remove the pressure switch tube
• Remove the pressure regulator assembly
• Disconnect the wires
• Remove the safety valve
• Install the new pressure switch
• Reinstall the safety valve
• Connect the wires
• Reinstall the pressure switch tube
• Screw the pressure gauge onto the new pressure switch and tighten the gauge firmly
• Test the air compressor. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts: