Models > HPA158190901

HPA158190901 Powermate Compressor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for HPA158190901

Viewing 3 of 3
Section_1 Diagram and Parts List for Powermate Compressor
Section_1
Section_2 Diagram and Parts List for Powermate Compressor
Section_2
Section_3 Diagram and Parts List for Powermate Compressor
Section_3
Keep searches simple, eg. "belt" or "pump".
Tube, Bleeder 1/4 X 28 – Part Number: 145-0324
$32.08
This is a genuine OEM replacement part that has been sourced directly from Powermate. This tube is ? of an inch in diameter and it is 28 inches long. It is runs from a check valve to a discharge port....
On Order
Hubcap – Part Number: 033-0001
$10.72
This is an original Powermate replacement part. The hubcap is commonly found on air compressors. This part is made of metal, and is used to secure the wheel to the axle. Please note that these hubc...
Special Order
Elbow, 90 Deg. Brass – Part Number: 064-0056
$31.72
This is an authentic manufacturer-sourced replacement part which is specially designed for use with Craftsman air compressors. The elbow threads into the bleeder tube on the tank check valve. This par...
In Stock
Order now and your part arrives by Mar 19
Connector, 1/4 Npt X 3/8 – Part Number: 068-0092
$16.32
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from AUBURN, WA
Parts Used:
033-0001
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
hubcap fell off my coleman air compressor
repair didn't happen the part was the wrong size so i wasted $20 and my time because the part was on back order (which the website did not show) Will never use you service again, complete waste of time and money
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from ANAHEIM, CA
Parts Used:
034-0192
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Air leak at pressure switch diaphram
Kobalt 15g compressor.
* unscrew 6 T-20 to remove compressor housing cover.

* disconnect 2x black wire and 2x wire, and 2x green.

* use hand torch (or lighter) to soften tubing.

034-0174 is a discontinued pressure swirch. Purchased 034-0192 which fit perfectly. Only difference between 0174 and 0192 is the unloader valve. Which I did not need as its my unit is piped separately.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More