Models > C2002

C2002 (Type 4) Porter Cable Compressor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for C2002

Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, a...
On Order
This is a tube seal used with various power tools. The seal prevents air from leaking out of your equipment. It is placed on the outlet tube, and connected to the head of the compressor. Note that thi...
In Stock
This high-quality OEM metal hose clamp is a part found in air compressors, and is sold individually. This part can be used on multiple parts on the air compressor, so the exact location, and repair ma...
In Stock
This is a valve plate for your compressor or generator. This part controls the air flow into the pump. When the air is pumped by the piston, it passes through the valve plate and into the compressor t...
In Stock
$19.16
This is a manufacturer-approved head gasket for an air compressor, sold individually. It is designed to seal the valve plate to the cylinder head. If this gasket is damaged or worn, this can create an...
On Order
$23.06
On Order
$11.53
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for C2002

Viewing 1 of 1
Air leak
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Donald from BRYAN, TX
Parts Used:
N036518
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Worn piston rod and sleeve
Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.

Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!