This is a manufacturer approved replacement part designed to work with Makita air compressors. The pressure switch tells your compressor when to stop and when to start. There are multiple reasons a pr...
This is an authentic Makita replacement part that has been OEM sourced to ensure a high level of quality. The regulator is intended to be used with air compressors. This part attaches to the manifold ...
It is an authentic Makita air filter assembly that is sourced from original equipment manufacturer for use with air compressors. The purpose of the filter is to ensure the air that goes in the unit is...
This is an authentic manufacturer-approved replacement part which is specially designed for use with Makita air compressors. Its purpose is to filter out dust and debris from contaminating the engine,...
The drain cock fits onto the air tank with frame. It is an OEM replacement part for Makita air compressors. This part is available individually and is made of metal. A wrench may be required to replac...
This is an authentic slight glass which includes the sealing o-ring gasket. It is a high quality item that is sourced directly from original equipment manufacturer for use with Makita air compressors....
This replacement pressure gauge is a high quality item designed for Makita air compressors. It is an authentic item that is sourced directly from original equipment manufacturer to provide in-tank pre...
This is an authentic Makita replacement part which is sourced from the original manufacturer for use with air compressors. The special circuit breaker is used to prevent the motor from overloading fro...
This is a genuine manufacturer-sourced replacement part which is specially designed for use with Makita air compressors. It is utilized to provides a tight seal between connected parts, please make su...
It is an authentic OEM sourced replacement part which is specially designed for use with Makita air compressors. This is an identical replacement for a missing or a faulty oil filter/crankcase breathe...
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Corey
December 27, 2021
I took the pressure switch apart totally by accident. Can you give me how it goes back together. Thanks
For model number MAC5200
Hello Corey, Thank you for the question. Very sorry, since the switch is not suppose to come apart, we do not have information on reassembling it. The Switch may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
After compressor reaches pressure setting, I have to toggle On/Off switch to make compressor to turn on again when tank is empty of air? Is pressure switch faulty or pressure regulator set too high?
For model number MAC5200
Hello Kartar, thank you for your inquiry. The Pressure Regulator is FIX11883518. The Pressure switch is FIX10149770. We believe it is the Pressure Switch. Good luck with this repair.
Hello Verl, thank you for the question. The reset button is located below the toolbox next to the motor head. If the motor overheated, the thermal overload protector shuts off the motor. Turn pressure switch to "OFF" position and wait for unit to cool before pushing the reset button and restarting. If the oil is low or empty, the pump won't compress properly. Check the sight glass on the pump, oil should be at the middle mark. Ensure the drain valve at the bottom of the tank is fully closed. With the unit on, spray soapy water around fittings, the regulator, and quick-connect couplers to identify leaks. Inspect the check valve, part number FIX10149599. The check valve is supposed to hold tank pressure after the switch reaches set pressure. If the brass check valve is leaking pressure back into the system, air will leak out of the unloader valve. Replace the check valve to fix the issue. We hope this is what you were looking for!
Turn on the compressor and it won’t fill up with air. Changed the oil and not sure what’s wrong.
For model number MAC5200
Hi Aaron,
Thank you for your question. If you start your compressor and it does not fill up with air, you will need to replace the pressure switch. The part number listed under your model number for the pressure switch is FIX10149770. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
My compressor turns on and regulator pressure is set to 100 psi and the tank reach’s 100 psi and keeps going and won’t shut off.
For model number MAC5200
Hi Aaron,
Thank you for your question. If the air compressor is not shutting off, the air filters may be clogged and you will need to either clean or replace them. If the filters are fine, you may have a broken pressure gauge, or a malfunctioning pressure relief valve, pressure switch or motor. If you have your air compressor plugged into a low powered extension cord, then the air compressor may continue to run. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
