Models
>
MAC500
MAC500 Compressor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for MAC500
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
$4.99
This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, a...
In Stock
In Stock
In Stock
In Stock
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Donald from BRYAN, TX
- Parts Used:
- N036518
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Worn piston rod and sleeve
Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt ... Read more through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt ... Read more through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Read less
Was this instruction helpful to you?
Thank you for voting!