Models
>
D55167
D55167 (Type 4) DeWALT Compressor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for D55167
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
$40.27
This is an OEM regulator repair kit for air compressors. This kit contains all the parts and instructions needed to restore a broken regulator. It is normal for the inner parts of the regulator to wea...
In Stock
Order now and your part arrives by Mar 21
$51.84
This part includes one black rubber belt for a compressor. It is sourced right from the original manufacturer. Over time, the belt can become brittle and break and will need to be replaced when this h...
In Stock
Order now and your part arrives by Mar 21
This is an OEM connecting rod and piston assembly for an air compressor. This assembly includes the cylinder tube, valve plate O-rings and a complete piston including the bearing. This assembly is usu...
In Stock
Order now and your part arrives by Mar 21
$6.25
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many cause...
In Stock
Order now and your part arrives by Mar 21
$6.25
This is a rubber O-ring for a compressor. It creates a seal for the tube as it enters the head. This part is sourced directly from the original manufacturer, ensuring it is the correct fit. It measure...
In Stock
Order now and your part arrives by Mar 21
$16.56
This is a genuine replacement part sourced directly from the manufacturer. The fan is commonly found in Craftsman air compressors. This part is made of high-quality plastic, and is placed in the cyl...
In Stock
Order now and your part arrives by Mar 21
$8.22
Genuine OEM replacement part designed for a variety of Air Compressors. This part is made out of Metal and it is Sold Individually. It does include sleeve. This item allows to connect two like-diamete...
On Order
$6.25
This is a Henuine OEM Authorized replacement part designed for use with Air Compressors. This item is made out of Metal and it is sold individually. This part is used to keep the brush tight against t...
In Stock
Order now and your part arrives by Mar 21
$6.25
This is an OEM replacement part designed to fit Air Compressors. This nut is for the tube as it enters the head. It is made out of Metal and it is Sold Individually. To replace this item you would need a Wrench.
In Stock
Order now and your part arrives by Mar 21
$67.05
Genuine DeWalt replacement part. rnIncludes 2 Carbon Brush with wire lead attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermitt...
On Order
$6.25
This O-ring is compatible with various models of compressors made by DeWALT, Black & Decker, and Bostitch. It is an authentic replacement part from original manufacturer. An O-ring is used to prevent ...
On Order
$6.25
This is a genuine OEM sourced replacement part designed for use with air compressors. It is used to secure the crankcase cover to the unit. This part is made out of metal and it is sold individually. ...
In Stock
Order now and your part arrives by Mar 21
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for D55167
Viewing 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Tim from Tucson, AZ
- Parts Used:
- ACG-408
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
Can't find this special screw used on many housings etc
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more AGC-408 by craftsman.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more AGC-408 by craftsman.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debra from PRESCOTT VLY, AZ
- Parts Used:
- D26615
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken ground on original plug
Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.
Replaced with new cord & replaced cover.
Works perfect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cary from SAGLE, ID
- Parts Used:
- N038785
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Older compressor runs but no longer builds pressure
After replacing the piston, cylinder sleeve and O-rings, the old compressor works like a champ. The hardest part was getting the nut loose holding the piston & bearing in place. Two socket wrenches and a big hammer was able to break the nut loose and get it off.
Was this instruction helpful to you?
Thank you for voting!