Y6020-WK (0) DeVilbiss Compressor - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Donald from BRYAN, TX
- Parts Used:
- N036518
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Worn piston rod and sleeve
Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tim from Tucson, AZ
- Parts Used:
- ACG-408
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
Can't find this special screw used on many housings etc
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debra from PRESCOTT VLY, AZ
- Parts Used:
- D26615
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken ground on original plug
Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.
Replaced with new cord & replaced cover.
Works perfect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from CARO, MI
- Parts Used:
- N044359
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
The compressor was getting air
Put the seal in and it ran like a champ. No vacuum leak and it now runs again!
Was this instruction helpful to you?
Thank you for voting!