Models
>
919-15214
919-15214 (Type 2) Craftsman Compressor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 919-15214
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
$7.60
This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, a...
In Stock
Order now and your part arrives by Mar 21
$6.25
This is a tube seal used with various power tools. The seal prevents air from leaking out of your equipment. It is placed on the outlet tube, and connected to the head of the compressor. Note that thi...
In Stock
Order now and your part arrives by Mar 21
$40.27
This is an OEM regulator repair kit for air compressors. This kit contains all the parts and instructions needed to restore a broken regulator. It is normal for the inner parts of the regulator to wea...
In Stock
Order now and your part arrives by Mar 21
$6.25
This high-quality OEM metal hose clamp is a part found in air compressors, and is sold individually. This part can be used on multiple parts on the air compressor, so the exact location, and repair ma...
In Stock
Order now and your part arrives by Mar 21
$28.88
This is a manufacturer-approved head gasket for an air compressor, sold individually. It is designed to seal the valve plate to the cylinder head. If this gasket is damaged or worn, this can create an...
In Stock
Order now and your part arrives by Mar 21
$53.80
This is a Genuine OEM replacement part designed for use with Air Compressors. This kit Includes: Piston Rod, Compression Ring , Cylinder Sleeve & Bearing. Please note that this kit does not include t...
In Stock
Order now and your part arrives by Mar 21
$6.25
This is a genuine manufacturer approved replacement part designed for use with air compressors. This is the hose that delivers air from the tank. It is made out of rubber and it is sold individually. ...
On Order
$21.60
This is an authentic OEM sourced part that is intended to be used with air compressors from Porter Cable, DeWalt, DeVilbiss, and Black & Decker. The isolators connect to the bottom of the frame of the...
In Stock
Order now and your part arrives by Mar 21
This is an original part from Craftsman. The regulator is made for use with many air compressors, and is sold individually. This component manages the air pressure level from the tank. A wrench set is...
No Longer Available
$18.70
It is a genuine item that is supplied by the original equipment manufacturer for use with air compressors. This high-quality part provides an identical replacement for a missing or a faulty quick conn...
In Stock
Order now and your part arrives by Mar 21
$10.45
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure...
In Stock
Order now and your part arrives by Mar 21
The gauge attaches to the pressure switch and is made of plastic and metal. It is an authentic OEM sourced item which is specially produced for use with compressors made by Porter Cable, DeVilbiss, an...
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 919-15214
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Donald from BRYAN, TX
- Parts Used:
- N036518
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Worn piston rod and sleeve
Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt ... Read more through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt ... Read more through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from CARO, MI
- Parts Used:
- N044359
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
The compressor was getting air
Put the seal in and it ran like a champ. No vacuum leak and it now runs again!
Was this instruction helpful to you?
Thank you for voting!