Models
>
919167620
919167620 Craftsman Compressor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 919167620
Viewing 2 of 2
Manuals & Guides for 919167620
Click to downloadKeep searches simple, eg. "belt" or "pump".
In Stock
In Stock
$51.21
This is a Genuine OEM replacement part designed for use with Air Compressors. This kit includes parts commonly responsible for low compression, including the piston and compression ring. Please note t...
In Stock
Special Order
In Stock
On Order
Special Order
Special Order
Special Order
On Order
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joseph
May 19, 2023
Compressor builds to 30 lbs then bogs down
For model number 919167620
Hi Joseph, thank you for reaching out. Based on the description that you have provided, we would recommend checking the pressure switch, part number FIX9875338, as it is most likely faulty and you may need to replace it. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Problems and Symptoms for 919167620
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
-
Customer:Tim from Tucson, AZ
-
Parts Used:ACG-408
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:
Can't find this special screw used on many housings etc
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Cary from SAGLE, ID
-
Parts Used:N038785
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
Older compressor runs but no longer builds pressure
After replacing the piston, cylinder sleeve and O-rings, the old compressor works like a champ. The hardest part was getting the nut loose holding the piston & bearing in place. Two socket wrenches and a big hammer was able to break the nut loose and get it off.
Was this instruction helpful to you?
Thank you for voting!