This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, a...
This part includes one black rubber belt for a compressor. It is sourced right from the original manufacturer. Over time, the belt can become brittle and break and will need to be replaced when this h...
This is an OEM connecting rod and piston assembly for an air compressor. This assembly includes the cylinder tube, valve plate O-rings and a complete piston including the bearing. This assembly is usu...
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many cause...
This O-ring tube seal helps create an airtight connection where the tube enters the compressor head, supporting proper pressure and efficient operation. Made from durable rubber, it is designed to wit...
This is a genuine replacement part sourced directly from the manufacturer. The fan is commonly found in Craftsman air compressors. This part is made of high-quality plastic, and is placed in the cyl...
Genuine OEM replacement part designed for a variety of Air Compressors. This part is made out of Metal and it is Sold Individually. It does include sleeve. This item allows to connect two like-diamete...
This is an OEM replacement part designed to fit Air Compressors. This nut is for the tube as it enters the head. It is made out of Metal and it is Sold Individually. To replace this item you would need a Wrench.
Genuine DeWalt replacement part. rnIncludes 2 Carbon Brush with wire lead attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermitt...
This O-ring is compatible with various models of compressors made by DeWALT, Black & Decker, and Bostitch. It is an authentic replacement part from original manufacturer. An O-ring is used to prevent ...
This is a genuine OEM sourced replacement part designed for use with air compressors. It is used to secure the crankcase cover to the unit. This part is made out of metal and it is sold individually. ...
This is a genuine OEM sourced replacement part is designed for use with air compressors. Its purpose is to filter out dust and debris. This filter is made out of pleated paper and plastic. This filter...
In Stock
Order now and your part arrives by Sep 14
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
February 11, 2025
The compressor will only reach around 60 psi before just stopping
For model number 919167600
Hi Michael, Thank you for writing. We suggest checking the Valve Plate for wear or damaged that would cause the Compressor not to reach full PSI. We hope this information helps!
What is the bore diam. ? I have an early sears roebuck & company 26 gallon compressor and need a cooling fan that goes on the motor armature splined shaft end . The size of the shaft(splined) is .461" over the splines , so the bore of the fan should be undersized by no more than .005" for a holding press fit . Do YOU HAVE SUCH A FAN ? OR HELP ME GET ONE ?
For model number 919167600
Hi Matthew, thank you for the question. We sell OEM parts only. The only fan listed under your model is part number A11031. It has 85mm diameter with a 12mm tapered shaft bore. We hope that helps!
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements. My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called
... Read more AGC-408 by craftsman.
After replacing the piston, cylinder sleeve and O-rings, the old compressor works like a champ. The hardest part was getting the nut loose holding the piston & bearing in place. Two socket wrenches and a big hammer was able to break the nut loose and get it off.
