Models
>
919162121
919162121 Craftsman Compressor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 919162121
Viewing 2 of 2
Manuals & Guides for 919162121
Click to downloadKeep searches simple, eg. "belt" or "pump".
$7.91
This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, a...
In Stock
Order now and your part arrives by Apr 6
$6.51
This is a tube seal used with various power tools. The seal prevents air from leaking out of your equipment. It is placed on the outlet tube, and connected to the head of the compressor. Note that thi...
In Stock
Order now and your part arrives by Apr 6
$6.51
This high-quality OEM metal hose clamp is a part found in air compressors, and is sold individually. This part can be used on multiple parts on the air compressor, so the exact location, and repair ma...
In Stock
Order now and your part arrives by Apr 6
$23.10
This is a valve plate for your compressor or generator. This part controls the air flow into the pump. When the air is pumped by the piston, it passes through the valve plate and into the compressor t...
In Stock
Order now and your part arrives by Apr 6
$30.07
This is a manufacturer-approved head gasket for an air compressor, sold individually. It is designed to seal the valve plate to the cylinder head. If this gasket is damaged or worn, this can create an...
In Stock
Order now and your part arrives by Apr 6
$33.98
Genuine OEM replacement parts kit. This Gasket Kit is used to prevent air leaks in the compressors listed below. Over time the gaskets will become compressed or cracked and you will hear an air leak c...
In Stock
Order now and your part arrives by Apr 6
$56.02
This is a Genuine OEM replacement part designed for use with Air Compressors. This kit Includes: Piston Rod, Compression Ring , Cylinder Sleeve & Bearing. Please note that this kit does not include t...
In Stock
Order now and your part arrives by Apr 6
$32.49
This is a genuine Porter Cable replacement part. Package includes one belt designed for easy installation. rn • Belt Width - 9/16"rn • Belt Length - 15" rn rnClean the pulleys off before putting ...
In Stock
Order now and your part arrives by Apr 6
$6.51
This item has been sourced from the original manufacturer and is intended to be used with air compressors from Porter Cable, Delta, DeVilbiss, Black & Decker, and DeWalt. The rubber isolator fits betw...
On Order
$6.51
This is a genuine manufacturer-sourced replacement screw which is specially produced for use with portable generators and air compressors. Make sure to refer to the appropriate diagrams of your model ...
In Stock
Order now and your part arrives by Apr 6
$6.51
This is an OEM part sourced directly from the manufacturer. The nut sleeve is designed for use in Craftsman air compressors. This part is made of metal, and is generally used in securing the check v...
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 919162121
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Donald from BRYAN, TX
- Parts Used:
- N036518
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Worn piston rod and sleeve
Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt ... Read more through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt ... Read more through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from CARO, MI
- Parts Used:
- N044359
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
The compressor was getting air
Put the seal in and it ran like a champ. No vacuum leak and it now runs again!
Was this instruction helpful to you?
Thank you for voting!